The Allis Chalmers G is a 2WD tool carrier manufactured by Allis Chalmers in Gadsden, Alabama, USA from 1948 to 1955. The Allis Chalmers G is equipped with a 1.0 L (62.0 cu·in) four-cylinder gasoline engine and non-synchronized gear transmission with 3 forward and 1 reverse gear.
The Allis Chalmers G tool carrier used the Continental AN62 engine. It is a 1.0 L, 1,016 cm2, (62.0 cu·in) four-cylinder natural aspirated gasoline engine with 60.0 mm (2.36 in) of the cylinder bore and 89.0 mm (3.5 in) of the piston stroke. The compression ratio rating is 5.75:1.
The Allis Chalmers G is equipped with manual steering, mechanical external expanding brakes, open operator station, and 19.0 liters (5 US gal.; 4.2 Imp. gal) fuel tank.
Allis Chalmers G Specifications
| General Specifications | |
| Model | Allis Chalmers G |
| Length | 2,900 mm (114.2 in) |
| Width | – |
| Height | 1,410 mm (55.5 in) |
| Wheel base | – |
| Weight | 635 kg (1,400 lbs) |
| Fuel tank capacity | 19.0 liters (5 US gal.; 4.2 Imp. gal) |
| Battery | 6V |
| Cabin type | Open operator station |
| Engine | |
| Engine model | Continental AN62 |
| Engine type | Four-stroke, liquid-cooled, inline |
| Cylinders | 4 |
| Fuel type | Gasoline |
| Displacement | 1.0 L, 1,016 cm2, (62.0 cu·in) |
| Bore and stroke | 60.0 mm X 89.0 mm (2.36 in X 3.5 in) |
| Compression ratio | 5.75:1 |
| Horsepower | – |
| Starter | Electric |
| Coolant capacity: | 6.2 L (6.6 US. qt, 5.5 Imp. qt.) |
| Transmission and chassis | |
| Chassis | 4×2 2WD |
| Steering type | Manual |
| Brakes | Mechanical external expanding |
| Transmission model | – |
| Transmission type | Non-synchronized gear |
| Gears | 3 forward and 1 reverse |
| Tires | |
| Front tires | Ag: 4.00-12 |
| Rear tires | Ag: 6-30 |
Be the first to comment