The Massey Ferguson 268 Xtra is a two-wheel or four-wheel tractor, manufactured under Massey Ferguson brand. The Massey Ferguson 268 Xtra tractor is equipped with Simpson S436 (3.6 L, 219.7 cu.in.) diesel engine and two transmission options: Sliding Spur transmission with 8 forward and 2 reverse or Synchromesh transmission with 12 forward and 4 reverse.
The 268 Xtra tractor used a four-cylinder naturally-aspirated liquid-cooled direct injection diesel engine Simpson S436, with 95 mm (3.74 in) of the cylinder bore and 127 mm (5 in) of the piston stroke. The Simpson S436 engine produced 64 PS (47 kW; 63 HP) at 2,300 rpm of output power and 226 Nm (23 kg·m; 166.8 ft·lb) at 1,800 rpm of torque. The engine used a dry air cleaner
The Massey Ferguson 268 Xtra used hydrostatic power-assisted steering and dual dry type clutch, mechanical differential and oil immersed mechanical actuated brakes. The Massey Ferguson 268 Xtra used open operator station.
Massey Ferguson 268 Xtra specifications
General Specifications
Model
Massey Ferguson 268 Xtra
Length
3,890 mm (153 in.)
Width
–
Height
2,520 mm (99.2 in.)
Wheelbase
2,050 mm (80.7 in.)
Ground clearance
–
Weight (operating)
2,820 kg (6,217 lb.)
Fuel tank capacity
60 l (15.8 Gal.)
Battery
12V
Engine
Engine model
Simpson S436
Number of Cylinders
4
Firing order
–
Fuel
Diesel
Displacement
3.6 L, (219.7 cu.in.)
Bore x stroke
95 x 127 mm (3.76 x 5.0 in)
Power output
64 PS (47 kW; 63 HP) at 2,300 rpm
Torque
226 Nm (23 kg·m; 166.8 ft·lb) at 1,800 rpm
Starter type
Electric starter
Oil type
–
Tires size
Front tires
7.50-16
Rear tires
16.9-28
Transmission and chassis
Chassis
4×2 2WD or 4×4 4WD
Steering
Hydrostatic
Sliding Spur transmission
Transmission type
Sliding gear
Gears
8 forward and 2 reverse
Sinchromesh transmission
Transmission type
Sinchromesh
Gears
12 forward and 4 reverse
PTO (Power take-off shaft)
PTO Type:
Rear, live type
PTO Speed:
540 rpm
Hydraulic lift
3-point linkage:
Category II
Control system:
–
No. of remote valves:
–
Max lifting capacity (at link end):
2,050 kg (4519 lb.)
Hydraulic system
Type
Ferguson system
Max oil flow
18.0 lpm
Pressure
176 bar
1 Comment
Am very thankful for these specification’s guides,some of which I didn’t know
Am very thankful for these specification’s guides,some of which I didn’t know