John Deere 8760

John Deere 8760The John Deere 8760 is a 4WD four-wheel drive tractor from the 8060 series. This tractor was manufactured by John Deere in Waterloo, Iowa, USA from 1989 to 1993. The JD 8760 is equipped with a 10.1 L (619.0 cu·in) six-cylinder diesel engine and one of three transmissions: a partially synchronized transmission with 12 forward and 3 reverse gears, a partial power shift transmission with 24 forward and 6 reverse gears or a full powershift transmission with 12 forward and 2 reverse gears.

The John Deere 8760 four-wheel drive tractor used the John Deere engine. It is a 10.1 L, 10,140 cm2, (619.0 cu·in) six-cylinder turbocharged diesel engine with 130.0 mm (5.12 in) of the cylinder bore and 127.0 mm (5 in) of the piston stroke. This engine produced 304.2 PS (223.7 kW; 300.0 HP) at 2,100 rpm of output power.

The John Deere 8760 is equipped with articulated power steering, Sound-Gard cab, and 832.7 liters (220 US gal.; 183.2 Imp. gal) fuel tank.

John Deere 8760 Specifications

General Specifications
Model John Deere 8760
Length 6,830 mm (268.9 in)
Width –
Height –
Wheel base 3,400 mm (133.9 in)
Weight 14,560 kg (32,100 lbs)
Fuel tank capacity 832.7 liters (220 US gal.; 183.2 Imp. gal)
Battery Two 12V, CCA 925A
Cabin type Sound-Gard cab
Engine
Engine model John Deere
Engine type Four-stroke, liquid-cooled, inline
Cylinders 6
Fuel type Diesel
Displacement 10.1 L, 10,140 cm2, (619.0 cu·in)
Bore and stroke 130.0 mm X 127.0 mm (5.12 in X 5 in)
Horsepower 304.2 PS (223.7 kW; 300.0 HP) at 2,100 rpm
Starter Electric
Coolant capacity: 55.0 L (58.1 US. qt, 48.4 Imp. qt.)
Transmission and chassis
Chassis 4×4 articulated 4WD
Steering type Articulated power
Brakes –
Transmission model John Deere Syncro
Transmission type Partially synchronized with hydraulic wet disc clutch
Gears 12 forward and 3 reverse
Transmission model John Deere PowrSync
Transmission type Partial power shift with hydraulic wet disc clutch
Gears 24 forward and 6 reverse
Transmission model John Deere Power Shift
Transmission type Full power shift with hydraulic wet disc clutch
Gears 12 forward and 2 reverse
Speed Forward: 32.6 kmh (20.3 mph) Reverse: 9.8 (6.1 mph)
Tires
Front tires Ag: 20.8R-38
Rear tires Ag: 20.8R-38
Three-Point Hitch
Caterogy III
Control type –
Lift capacity (at ends) 6,795 kg (14,985 lbs)
PTO (Power take-off shaft)
Rear PTO type Independent
Rear PTO speed 1,000 rpm
Hydraulic system
Hydraulic type Closed-center pressure compensated
Hydraulic capacity 177.9 L (187.99 US. qt, 156.53 Imp. qt.)
Valves 3
Pump flow 44.8 gpm (169.6 lpm)
SCV flow 33.3 gpm (126.1 lpm)

Be the first to comment

Leave a Reply

Your email address will not be published.


*