The J.I. Case 1190 is a 2WD utility tractor from the 90 series. This tractor was manufactured by J.I. Case in Meltham Mills, Huddersfield, England from 1980 to 1983. The J.I. Case 1190 is equipped with a 2.7 L (164.0 cu·in) three-cylinder diesel engine and a synchromesh transmission with 12 forward and 4 reverse gears and dry disc clutch.
The J.I. Case 1190 utility tractor used the J.I. Case engine. It is a 2.7 L, 2,687 cm2, (164.0 cu·in) three-cylinder natural aspirated diesel engine with 100.0 mm (3.94 in) of the cylinder bore and 114.0 mm (4.49 in) of the piston stroke. The compression ratio rating is 17.0:1. This engine produced 43.7 PS (32.1 kW; 43.0 HP) at 2,200 rpm of PTO output power.
The J.I. Case 1190 is equipped with hydrostatic power steering, mechanical drum brakes, two-post ROPS, and 60.6 liters (16 US gal.; 13.3 Imp. gal) fuel tank.
J.I. Case 1190 Specifications
| General Specifications | |
| Model | J.I. Case 1190 |
| Length | 3,070 mm (120.9 in) |
| Width | – |
| Height (exhaust) | 2,130 mm (83.9 in) |
| Wheel base | 1,950 mm (76.8 in) |
| Ground clearance (front axle) | 400 mm (15.7 in) |
| Weight (shipping) | 2,095 kg (4,619 lbs) |
| Fuel tank capacity | 60.6 liters (16 US gal.; 13.3 Imp. gal) |
| Battery | 12V, 26Ah |
| Cabin type | Two-post ROPS |
| Engine | |
| Engine model | J.I. Case |
| Engine type | Four-stroke, liquid-cooled, inline |
| Cylinders | 3 |
| Fuel type | Diesel |
| Displacement | 2.7 L, 2,687 cm2, (164.0 cu·in) |
| Bore and stroke | 100.0 mm X 114.0 mm (3.94 in X 4.49 in) |
| Compression ratio | 17.0:1 |
| Horsepower | 43.7 PS (32.1 kW; 43.0 HP) at 2,200 rpm |
| Starter | Electric |
| Oil capacity: | 6.2 L (6.6 US. qt, 5.5 Imp. qt.) |
| Coolant capacity: | 8.5 L (9 US. qt, 7.5 Imp. qt.) |
| Transmission and chassis | |
| Chassis | 4×2 2WD |
| Steering type | Hydrostatic power |
| Brakes | Mechanical drum |
| Transmission model | – |
| Transmission type | Synchromesh with dry disc clutch |
| Gears | 12 forward and 4 reverse |
| Speed | Forward: 25.9 kmh (16.1 mph) Reverse: 14.9 (9.3 mph) |
| Tires | |
| Front tires | Ag: 6.00×16 |
| Rear tires | Ag: 13.6×28 |
| Three-Point Hitch | |
| Category | I |
| Control type | – |
| Lift capacity (at ends) | – |
| PTO (Power take-off shaft) | |
| Rear PTO type | Transmission |
| Rear PTO speed | 540 rpm |
| Hydraulic system | |
| Hydraulic type | Open center |
| Hydraulic capacity | 27.3 L (7.2 US. gal, 6 Imp. gal.) |
| Valves | 1 or 2 |
| Pump flow | 7.25 gpm (27.4 lpm) |
Be the first to comment