The CaseIH 5250 Maxxum is a 2WD or 4WD tractor from the Maxxum series. This tractor was manufactured by CaseIH from 1992 to 1997. The Case IH 5250 Maxxum is equipped with a 5.9 L (359.0 cu·in) six-cylinder diesel engine and one of two transmissions: a partial power shift transmission with 16 forward and 12 reverse gears or a transmission with 24 forward and 20 reverse gears.
The CaseIH 5250 Maxxum tractor used the CDC engine. It is a 5.9 L, 5,883 cm2, (359.0 cu·in) six-cylinder turbocharged diesel engine with 102.0 mm (4.02 in) of the cylinder bore and 120.0 mm (4.72 in) of the piston stroke. This engine produced 113.6 PS (83.5 kW; 112.0 HP) at 2,200 rpm of PTO output power.
The Case-IH 5250 Maxxum is equipped with power steering, brakes, cab (standard), and 135.1 liters (35.7 US gal.; 29.7 Imp. gal) fuel tank.
CaseIH 5250 Maxxum Specifications
| General Specifications | |
| Model | Case IH 5250 Maxxum |
| Length | – |
| Width | – |
| Height | – |
| Wheel base | – |
| Weight | 7,260 kg (16,006 lbs) |
| Fuel tank capacity | 135.1 liters (35.7 US gal.; 29.7 Imp. gal) |
| Battery | 12V |
| Cabin type | Cab (standard) |
| Engine | |
| Engine model | CDC |
| Engine type | Four-stroke, liquid-cooled, inline |
| Cylinders | 6 |
| Fuel type | Diesel |
| Displacement | 5.9 L, 5,883 cm2, (359.0 cu·in) |
| Bore and stroke | 102.0 mm X 120.0 mm (4.02 in X 4.72 in) |
| Horsepower | 113.6 PS (83.5 kW; 112.0 HP) at 2,200 rpm |
| Starter | Electric |
| Transmission and chassis | |
| Chassis | 4×2 2WD or 4×4 MFWD 4WD |
| Steering type | Power |
| Brakes | – |
| Transmission model | – |
| Transmission type | Partial power shift |
| Gears | 16 forward and 12 reverse |
| Transmission model | – |
| Transmission type | – |
| Gears | 24 forward and 20 reverse |
| Tires | |
| Front tires | Ag: 7.50-18 |
| Rear tires | Ag: 18.4-38 |
| Three-Point Hitch | |
| Category | II |
| Control type | – |
| Lift capacity (at ends) | 3,490 kg (7,695 lbs) |
| PTO (Power take-off shaft) | |
| Rear PTO type | Independent |
| Rear PTO speed | 540/1000 rpm |
| Hydraulic system | |
| Hydraulic type | Closed center |
| Valves | 1 |
| Pump flow | 20.0 gpm (75.7 lpm) |
Be the first to comment