CaseIH 5130

CaseIH 5130The CaseIH 5130 is a 2WD/4WD row-crop tractor from the Maxxum series. This tractor was manufactured by CaseIH in Neuss, Germany from 1990 to 1997. The CaseIH 5130 Maxxum is equipped with a 5.9 L (359.0 cu·in) six-cylinder diesel engine and one of two transmissions: a power shuttle transmission with 16 forward and 12 reverse gears or a four-speed power shift transmission with 16 forward and 12 reverse gears (24 forward and 20 reverse with creeper).

The CaseIH 5130 row-crop tractor used the CDC 6-590 engine. It is a 5.9 L, 5,883 cm2, (359.0 cu·in) six-cylinder diesel engine with 102.0 mm (4.02 in) of the cylinder bore and 120.0 mm (4.72 in) of the piston stroke. The compression ratio rating is 17.0:1. This engine produced 106.5 PS (78.3 kW; 105.0 HP) at 2,200 rpm of output power and 386.1 N·m (39.4 kg·m, 284.6 ft·lb) at 1,100 rpm of torque.

The Case International 5130 is equipped with power steering, wet disc brakes, two-post ROPS or cab (optional) and 170.0 liters (44.9 US gal.; 37.4 Imp. gal) fuel tank.

CaseIH 5130 Specifications

General Specifications
ModelCaseIH 5130
Length4,450 mm (175.2 in)
Width2,200 mm (86.6 in)
Height (cab)2,690 mm (105.9 in)
Wheel base 2WD: 2,630 mm (103.5 in)
4WD: 2,580 mm (101.6 in)
Ground clearance450 mm (17.7 in)
Weight (shipping) 2WD ROPS: 4,290 kg (9,458 lbs)
4WD Cab: 4,800 kg (10,582 lbs)
Fuel tank capacity170.0 liters (44.9 US gal.; 37.4 Imp. gal)
Battery12V, 105Ah
Cabin typeTwo-post ROPS or cab (optional)
Engine modelCDC 6-590
Engine typeFour-stroke, liquid-cooled, inline
Fuel typeDiesel
Displacement5.9 L, 5,883 cm2, (359.0 cu·in)
Bore and stroke102.0 mm X 120.0 mm (4.02 in X 4.72 in)
Compression ratio17.0:1
Horsepower106.5 PS (78.3 kW; 105.0 HP) at 2,200 rpm
Torque386.1 N·m (39.4 kg·m, 284.6 ft·lb) at 1,100 rpm
Oil capacity:15.0 L (15.9 US. qt, 13.2 Imp. qt.)
Coolant capacity:20.8 L (22 US. qt, 18.3 Imp. qt.)
Transmission and chassis
Chassis4×2 2WD or 4×4 MFWD 4WD
Steering typePower
BrakesWet disc
Final drivePlanetary
Transmission model
Transmission typePower shuttle
Gears16 forward and 12 reverse
Transmission model
Transmission typeFour-speed power shift
Gears16 forward and 12 reverse
Speed Forward: 40.0 kmh (24.9 mph) Reverse: 22.0 kmh (13.7 mph)
Front tires Ag: 14.9R24
Rear tires Ag: 16.9R38
Three-Point Hitch
Control typeElectro-hydraulic lower-link draft sensing
Lift capacity (at 610 mm/24 in)3,492 kg (7,700 lbs)
PTO (Power take-off shaft)
Rear PTO typeIndependent with hydraulic wet disc clutch
Rear PTO speed540/1000 (1.375)
Hydraulic system
Hydraulic type
Hydraulic capacity76.1 L (20.1 US. gal, 16.7 Imp. gal.)
Pressure2756 psi (190 bar)
Pump flow20.7 gpm (78.4 lpm)
ATTENTION! Dear visitors, this site is not a trading platform, an official dealer or a spare parts supplier, so we do not have any price lists, spare parts catalogs, service or owner manuals. We are an information portal and provide the technical specifications.

We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.

Be the first to comment

Leave a Reply

Your email address will not be published.