CaseIH 8940

CaseIH 8940The CaseIH 8940 Magnum is a 2WD/4WD row-crop tractor from the Magnum 8900 series. This tractor was manufactured by CaseIH in Racine, Wisconsin, USA from 1997 to 1998. The CaseIH 8940 is equipped with a 8.3 L (504.5 cu·in) six-cylinder diesel engine and a full power shift transmission with 18 forward and 4 reverse gears (24 forward and 6 reverse gears with creeper).

The Case International 8940 row-crop tractor used the CDC engine. It is a 8.3 L, 8,267 cm2, (504.5 cu·in) six-cylinder turbocharged intercooled diesel engine with 114.0 mm (4.49 in) of the cylinder bore and 135.0 mm (5.31 in) of the piston stroke. The compression ratio rating is 16.5:1. This engine produced 207.9 PS (152.9 kW; 205.0 HP) at 2,200 rpm of PTO output power.

The CaseIH 8940 is equipped with power steering, differential hydraulic wet disc brakes, cab (standard) with air-conditioning and 442.8 liters (117 US gal.; 97.4 Imp. gal) fuel tank.

CaseIH 8940 Specifications

General Specifications
Model CaseIH 8940 Magnum
Length
Width
Height
Wheel base 3,000 mm (118.1 in)
Ground clearance (front axle) 2WD: 570 mm (22.4 in)
4WD: 440 mm (17.3 in)
Weight (shipping) 2WD: 7,180 kg (15,829 lbs)
4WD: 7,640 kg (16,843 lbs)
Fuel tank capacity 442.8 liters (117 US gal.; 97.4 Imp. gal)
Battery Two 12V, CCA 950A
Cabin type Cab (standard) with air-conditioning
Engine
Engine model CDC
Engine type Four-stroke, liquid-cooled, inline
Cylinders 6
Fuel type Diesel
Displacement 8.3 L, 8,267 cm2, (504.5 cu·in)
Bore and stroke 114.0 mm X 135.0 mm (4.49 in X 5.31 in)
Compression ratio 16.5:1
Horsepower 207.9 PS (152.9 kW; 205.0 HP) at 2,200 rpm
Starter Electric
Oil capacity: 20.8 L (22 US. qt, 18.3 Imp. qt.)
Coolant capacity: 29.3 L (31 US. qt, 25.8 Imp. qt.)
Transmission and chassis
Chassis 4×2 2WD or 4×4 MFWD 4WD
Steering type Power
Brakes Differential hydraulic wet disc
Differential lock Electric rear
Transmission model
Transmission type Full power shift with hydraulic wet disc clutch
Gears 18 forward and 4 reverse
Speed Forward: 32.8 kmh (20.4 mph) Reverse: 11.9 kmh (7.4 mph)
Tires
Front tires Ag: 14L-16.1
Rear tires Ag: 18.4R-42
Three-Point Hitch
Category III/IIIN
Control type Electronic lower-link draft sensing
Lift capacity 6,240 kg (13,760 lbs)
Optional: 7,257 kg (16,000 lbs)
PTO (Power take-off shaft)
Rear PTO type Independent with electro-hydraulic clutch
Rear PTO speed 1000 (1.75)
Hydraulic system
Hydraulic type Closed center pressure-flow compensated (PFC)
Hydraulic capacity 172.2 L (45.5 US. gal, 37.9 Imp. gal.)
Pressure 2200 psi (151.7 bar)
Valves 2 to 4
Pump flow 29.0 gpm (109.8 lpm)
SCV flow 27.0 gpm (102.2 lpm)

Be the first to comment

Leave a Reply

Your email address will not be published.


*