AGCO Allis 9785

AGCO Allis 9785The AGCO Allis 9785 is a 4WD row-crop tractor manufactured by AGCO Allis from 1998 to 2001. The AGCO Allis 9785 is equipped with an 8.7 L (531.0 cu·in) six-cylinder diesel engine and a full powershift transmission with hydraulic wet disc clutch and 18 forward and 6 reverse gears (36 forward and 12 reverse gears with creeper).

The AGCO Allis 9785 row-crop tractor used the Navistar diesel engine. It is a 8.7 L, 8,702 cm2, (531.0 cu·in) six-cylinder turbocharged intercooled diesel engine with 117.0 mm (4.61 in) of the cylinder bore and 136.0 mm (5.35 in) of the piston stroke. This engine produced 228.2 PS (167.8 kW; 225.0 HP) at 2,200 rpm of PTO output power.

The AGCO Allis 9785 is equipped with hydrostatic power steering, hydraulic wet disc brakes, Cab, and 454.2 liters (120 US gal.; 99.9 Imp. gal) fuel tank.

AGCO Allis 9785 Specifications

General Specifications
ModelAGCO Allis 9785
Length–
Width–
Height–
Wheel base2,870 mm (113 in)
Weight8,525 kg (18,794 lbs)
Fuel tank capacity454.2 liters (120 US gal.; 99.9 Imp. gal)
Battery12V
Cabin typeCab
Engine
Engine modelNavistar
Engine typeFour-stroke, liquid-cooled, inline
Cylinders6
Fuel typeDiesel
Displacement8.7 L, 8,702 cm2, (531.0 cu·in)
Bore and stroke117.0 mm X 136.0 mm (4.61 in X 5.35 in)
Horsepower228.2 PS (167.8 kW; 225.0 HP) at 2,200 rpm
StarterElectric
Transmission and chassis
Chassis4×4 MFWD 4WD
Steering typeHydrostatic power
BrakesHydraulic wet disc
Transmission model
Transmission typeFull power shift with hydraulic wet disc clutch
Gears18 forward and 6 reverse
Tires
Front tiresAg: 16.9R-28
Rear tiresAg: 18.4R-42
Three-Point Hitch
CaterogyIII/IIIN
Control type–
Lift capacity (at ends)6,350 kg (14,000 lbs)
PTO (Power take-off shaft)
Rear PTO typeIndependent
Rear PTO speed1,000 rpm
Hydraulic system
Hydraulic typeClosed center pressure flow compensated (PFC)
Pressure2900 psi (199.9 bar)
Valves4
Pump flow 29.0 gpm (109.8 lpm)
39.0 gpm (147.6 lpm)
ATTENTION! Dear visitors, this site is not a trading platform, an official dealer or a spare parts supplier, so we do not have any price lists, spare parts catalogs, service or owner manuals. We are an information portal and provide the technical specifications.

We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.

Be the first to comment

Leave a Reply

Your email address will not be published.


*