The AGCO Allis 9755 is a 4WD row-crop tractor from the 9700 series. This tractor was manufactured by the AGCO Allis from 1998 to 2001. The AGCO Allis 9755 is equipped with an 8.7 L six-cylinder diesel engine and full power shift transmission with hydraulic wet disc clutch and 18 forward and 6 reverse gears.
The AGCO Allis 9755 row-crop tractor used the Navistar engine. It is an 8.7 L, 8,702 cm2, (531.0 cu·in) six-cylinder natural aspirated diesel engine with 117.0 mm (4.61 in) of the cylinder bore and 136.0 mm (5.35 in) of the piston stroke. The compression ratio rating is 16.5:1. This engine produced 179.5 PS (132 kW; 177.0 HP) of output power.
The AGCO Allis 9755 is equipped with hydrostatic power steering, hydraulic wet disc brakes, cab and 439.0 liters (116 US gal.; 96.6 Imp. gal) fuel tank.
AGCO Allis 9755 Specifications
| General Specifications | |
| Model | AGCO Allis 9755 |
| Length | – |
| Width | – |
| Height | – |
| Wheel base | 2,870 mm (113 in) |
| Weight | 8,210 kg (18,100 lbs) |
| Fuel tank capacity | 439.0 liters (116 US gal.; 96.6 Imp. gal) |
| Battery | 12V |
| Cabin type | Cab |
| Engine | |
| Engine model | Navistar |
| Engine type | Four-stroke, liquid-cooled, inline |
| Cylinders | 6 |
| Fuel type | Diesel |
| Displacement | 8.7 L, 8,702 cm2, (531.0 cu·in) |
| Bore and stroke | 117.0 mm X 136.0 mm (4.61 in X 5.35 in) |
| Compression ratio | 16.5:1 |
| Horsepower | 179.5 PS (132 kW; 177.0 HP) |
| Starter | Electric |
| Transmission and chassis | |
| Chassis | 4×4 MFWD 4WD |
| Steering type | Hydrostatic power |
| Brakes | Hydraulic wet disc |
| Transmission model | – |
| Transmission type | Full power shift with hydraulic wet disc clutch |
| Gears | 18 forward and 6 reverse |
| Speed | Forward: 38.5 kmh (23.9 mph) Reverse: 10.8 (6.7 mph) |
| Transmission model | – |
| Transmission type | Creeper |
| Gears | 36 forward and 12 reverse |
| Tires | |
| Front tires | Ag: 14.9R-28 |
| Rear tires | Ag: 18.4R38 |
| Three-Point Hitch | |
| Caterogy | III/IIIN |
| Control type | – |
| Lift capacity (at 610 mm / 24 in) | 5,440 kg (11,995 lbs) |
| PTO (Power take-off shaft) | |
| Rear PTO type | Independent |
| Rear PTO spped | 1,000 rpm |
| Hydraulic system | |
| Hydraulic type | Closed center pressure flow compensated (PFC) |
| Pressure | 2900 psi (199.9 bar) |
| Valves | 4 |
| Pump flow |
29.0 gpm (110 lpm) 39.0 gpm (148 lpm) – optional |