The AGCO Allis 4650 is a 2WD/4WD utility tractor from the 4600 series. This tractor was manufactured by the SAME in Italy for AGCO Allis a part of AGCO from 1991 to 1997. The AGCO Allis 4650 is equipped with 3.1 L three-cylinders diesel engine and Synchromesh transmission with 12 forward and 3 reverse gears or 16 forward and 4 reverse.
The AGCO Allis 4650 utility tractor used 3.1 L, 3113 cm2, (190 cu·in) three-cylinders air-cooled diesel engine. This engine produced 50.7 PS (37.3 kW; 50 HP) of maximum output power.
The AGCO Allis 4650 is equipped with four-post ROPS (Rollover protection structure) and 55.0 liters (14.5 US gal.; 12.1 Imp. gal) fuel tank.
AGCO Allis 4650 Specifications
| General Specifications | |
| Model | AGCO Allis 4650 |
| Length | – |
| Width | – |
| Height | – |
| Wheel base | 2,110 mm (83.1 in) |
| Weight | 2,030 kg (4,475 lbs) |
| Fuel tank capacity | 55.0 liters (14.5 US gal.; 12.1 Imp. gal) |
| Battery | 12V |
| Cabin type | Four-post ROPS |
| Engine | |
| Engine model | SLH |
| Engine type | Four-stroke, air-cooled, inline |
| Cylinders | 3 |
| Fuel type | Diesel |
| Displacement | 3.1 L, 3,113 cm2, (190 cu·in) |
| Bore and stroke | – |
| Horsepower | 50.7 PS (37.3 kW; 50 HP) |
| Starter | Electric |
| Transmission and chassis | |
| Chassis | 4×2 2WD or x4 MFWD 4WD |
| Steering type | – |
| Brakes | – |
| Transmission model | – |
| Transmission type | Synchromesh |
| Gears | 12 forward and 3 reverse |
| Transmission model | – |
| Transmission type | – |
| Gears | 16 forward and 4 reverse |
| Tires | |
| Front tires | Ag: 6.50-16 |
| Rear tires | Ag: 13.6R28 |
| Three-Point Hitch | |
| Caterogy | I |
| Control type | – |
| Lift capacity | 2100 kg (4631 lbs) |
| PTO (Power take-off shaft) | |
| Rear PTO type | Independent |
| Rear PTO spped | 540 rpm |
| Hydraulic system | |
| Hydraulic type | Open center |
| Valves | 1 |
| Pump flow | 10.3 gpm (39 lpm) |
Be the first to comment