AGCO DT180AThe AGCO DT180A is a 4WD row-crop tractor from the DT series. This tractor was manufactured by the AGCO in Beauvais, France from 2005 to 2008. The AGCO DT180A is equipped with 7.4 L diesel engine and continuously variable transmission with infinite (two-range) forward and reverse gears.

The AGCO DT180A row-crop tractor used 7.4 L, 7,358 cm2, (449 cu·in) six-cylinder turbocharged diesel engine with intercooler. It has a 108.0 mm (4.25 in) of the cylinder bore and 134.0 mm (5.28 in) of the piston stroke. This engine produced 218 PS (160.3 kW; 215 HP) of maximum output power.

The AGCO DT180A is equipped with hydrostatic power steering, hydraulic wet disc brakes, cabin with optional pneumatic suspension and 600.0 liters (158.5 US gal.; 132 Imp. gal) fuel tank.

AGCO DT180A Specifications

General Specifications
ModelAGCO DT180A
Length5,230 mm (205.9 in)
Height3,090 mm (121.7 in)
Wheel base3,070 mm (120.9 in)
Weight8,680 kg (19136.1 lbs)
Fuel tank capacity600.0 liters (158.5 US gal.; 132 Imp. gal)
Cabin typeCab with optional pneumatic suspension
Engine modelSisu Diesel
Engine typeFour-stroke, liquid-cooled, inline
Fuel typeDiesel
Displacement7.4 L, 7,358 cm2, (449 cu·in)
Bore and stroke108.0 mm X 134.0 mm (4.25 in X 5.28 in)
Horsepower218 PS (160.3 kW; 215 HP)
Transmission and chassis
Chassis4×4 MFWD 4WD
Steering typeHydrostatic power
BrakesHydraulic wet disc
Transmission modelPowerMaxx CVT
Transmission typeContinuously variable transmission
GearsInfinite (two-range) forward and reverse
Speed Forward: 40.2 kmh (25 mph) Reverse: 19.3 (12 mph)
Front tires
Rear tires
Three-Point Hitch
Control type
Lift capacity6,530 kg (14,400 lbs)
PTO (Power take-off shaft)
Rear PTO typeIndependent
Rear PTO spped540/1000 rpm
Hydraulic system
Hydraulic typeClosed center pressure flow compensated (PFC)
Pressure2900 psi (199.9 bar)
Valves4 or 5
Pump flow39.0 gpm (147.6 lpm)
ATTENTION! Dear visitors, this site is not a trading platform, an official dealer or a spare parts supplier, so we do not have any price lists, spare parts catalogs, service or owner manuals. We are an information portal and provide the technical specifications.

We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.

Be the first to comment

Leave a Reply

Your email address will not be published.