AGCO DT200AThe AGCO DT200A is a 4WD row-crop tractor from the DT series. This tractor was manufactured by the AGCO in Beauvais, France from 2005 to 2008. The AGCO DT200A is equipped with 7.4 L diesel engine and continuously variable transmission with infinite (two-range) forward and reverse gears

The AGCO DT200A row-crop tractor used the Sisu diesel engine. it is a 7.4 L, 7,358 cm2, (449 cu·in) six-cylinder turbocharged diesel engine with intercooler. This engine has 108.0 mm (4.25 in) of the cylinder bore and 134.0 mm (5.28 in) of the piston stroke. The compression ratio rating is 17.5:1. This engine produced 238.3 PS (175.2 kW; 235 HP) at 2,200 rpm of maximum output power.

The AGCO DT200A is equipped with hydrostatic power steering, hydraulic wet disc brakes, cabin with optional pneumatic suspension and 600.0 liters (158.5 US gal.; 132 Imp. gal) fuel tank.

AGCO DT200A Specifications

General Specifications
Model AGCO DT200A
Length 5,230 mm (205.9 in)
Height 3,090 mm (121.7 in)
Wheel base 3,070 mm (120.9 in)
Weight 8,680 kg (19,136 lbs)
Fuel tank capacity 600.0 liters (158.5 US gal.; 132 Imp. gal)
Battery 12V
Cabin type Cab with optional pneumatic suspension
Engine model Sisu Diesel
Engine type Four-stroke, liquid-cooled, inline
Cylinders 6
Fuel type Diesel
Displacement 7.4 L, 7,358 cm2, (449 cu·in)
Bore and stroke 108.0 mm X 134.0 mm (4.25 in X 5.28 in)
Compression ratio 17.5:1
Horsepower 238.3 PS (175.2 kW; 235 HP) at 2,200 rpm
Starter Electric
Transmission and chassis
Chassis 4×4 MFWD 4WD
Steering type Hydrostatic power
Brakes Hydraulic wet disc
Transmission model PowerMaxx CVT
Transmission type Continuously variable transmission
Gears Infinite (two-range) forward and reverse
Speed Forward: 40.2 kmh (25 mph) Reverse: 19.3 (12 mph)
Front tires
Rear tires
Three-Point Hitch
Caterogy III
Control type
Lift capacity 6,530 kg (14,400 lbs)
PTO (Power take-off shaft)
Rear PTO type Independent
Rear PTO spped 540/1000 rpm
Hydraulic system
Hydraulic type Closed center pressure flow compensated (PFC)
Pressure 2900 psi (199.9 bar)
Valves 4 or 5
Pump flow 39.0 gpm (147.6 lpm)
ATTENTION! Dear visitors, this site is not a trading platform, an official dealer or a spare parts supplier, so we do not have any price lists, spare parts catalogs, service or owner manuals. We are an information portal and provide the technical specifications.

We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.

Be the first to comment

Leave a Reply

Your email address will not be published.