Allis Chalmers 6140

Allis Chalmers 6140The Allis Chalmers 6140 is a 2WD or 4WD utility tractor manufactured by Allis Chalmers in from 1982 to 1985. The Allis Chalmers 6140 is equipped with a 2.3 L (142.2 cu·in) three-cylinder diesel engine and a synchromesh transmission with dry disc clutch and 10 forward and 2 reverse gears.

The Allis Chalmers 6140 utility tractor used the Toyosha engine. It is a 2.3 L, 2,330 cm2, (142.2 cu·in) three-cylinder natural aspirated diesel engine with 98.0 mm (3.86 in) of the cylinder bore and 103.0 mm (4.06 in) of the piston stroke. The compression ratio rating is 23.0:1. This engine produced 40.5 PS (29.8 kW; 40.0 HP) at 2,500 rpm of output power.

The Allis Chalmers 6140 is equipped with power steering, mechanical wet disc brakes, open operator station, ROPS and canopy (optional), and 50.0 liters (13.2 US gal.; 11 Imp. gal) fuel tank.

Allis Chalmers 6140 Specifications

General Specifications
Model Allis Chalmers 6140
Length 3,340 mm (131.5 in)
Width 1,730 mm (68.1 in)
Height (exhaust) 2,230 mm (87.8 in)
Wheel base 1,930 mm (76 in)
Weight 2WD: 1,815 kg (4,000 lbs)
4WD: 1,995 kg (4,400 lbs)
Fuel tank capacity 50.0 liters (13.2 US gal.; 11 Imp. gal)
Battery 12V
Cabin type Open operator station, ROPS and canopy (optional).
Engine model Toyosha
Engine type Four-stroke, liquid-cooled, inline
Cylinders 3
Fuel type Diesel
Displacement 2.3 L, 2,330 cm2, (142.2 cu·in)
Bore and stroke 98.0 mm X 103.0 mm (3.86 in X 4.06 in)
Compression ratio 23.0:1
Horsepower 40.5 PS (29.8 kW; 40.0 HP) at 2,500 rpm
Starter Electric
Coolant capacity: 8.5 L (9 US. qt, 7.5 Imp. qt.)
Transmission and chassis
Chassis 4×2 2WD or 4×4 MFWD 4WD
Steering type Power
Brakes Mechanical wet disc
Final drive Inboard planetary
Differential lock Mechanical rear
Transmission model
Transmission type Synchromesh with dry disc clutch
Gears 10 forward and 2 reverse
Front tires Ag: 6.00-16, 7.50-16, 8.00-18
Rear tires Ag: 13.6-28, 14.9-28
Three-Point Hitch
Caterogy I
Control type Top-link draft sensing
Lift capacity (at ends) 1,450 kg (3,200 lbs)
PTO (Power take-off shaft)
Rear PTO type Independent
Rear PTO speed 540 rpm
Hydraulic system
Hydraulic type Open center
Pump flow 10.0 gpm (37.9 lpm)
ATTENTION! Dear visitors, this site is not a trading platform, an official dealer or a spare parts supplier, so we do not have any price lists, spare parts catalogs, service or owner manuals. We are an information portal and provide the technical specifications.

We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.

Be the first to comment

Leave a Reply

Your email address will not be published.