Allis Chalmers 7060

Allis Chalmers 7060The Allis Chalmers 7060 is a 2WD row-crop tractor manufactured by Allis Chalmers in West Allis, Wisconsin, USA from 1974 to 1981. The Allis Chalmers 7060 is equipped with a 7.0 L (426.0 cu·in) six-cylinder diesel engine and one of two transmissions: a partial power shift transmission with 20 forward and 4 reverse gears or a partial power shift transmission with 12 forward and 2 reverse gears.

The Allis Chalmers 7060 row-crop tractor used the Allis Chalmers 670I engine. It is a 7.0 L, 6,980 cm2, (426.0 cu·in) six-cylinder turbocharged intercooled diesel engine with 108.0 mm (4.25 in) of the cylinder bore and 127.0 mm (5 in) of the piston stroke. The compression ratio rating is 16.0:1. This engine produced 194.8 PS (143.2 kW; 192.0 HP) at 2,300 rpm of output power.

The AC 7060 is equipped with hydrostatic power steering, differential hydraulic wet discs brakes, the Accousta cab or Accousta cab II (available from 1978), and 193.0 liters (51 US gal.; 42.5 Imp. gal) fuel tank.

Allis Chalmers 7060 Specifications

General Specifications
Model Allis Chalmers 7060
Length 4,140 mm (163 in)
Width 2,420 mm (95.3 in)
Height (exhaust) 2,970 mm (116.9 in)
Wheel base 2,690 mm (105.9 in)
Weight Power Director: 6,345 kg (13,990 lbs)
Power shift: 6,640 kg (14,645 lbs)
Fuel tank capacity 193.0 liters (51 US gal.; 42.5 Imp. gal)
Battery 12V
Cabin type Accousta cab, Accousta cab II (available from 1978)
Engine
Engine model Allis Chalmers 670I
Engine type Four-stroke, liquid-cooled, inline
Cylinders 6
Fuel type Diesel
Displacement 7.0 L, 6,980 cm2, (426.0 cu·in)
Bore and stroke 108.0 mm X 127.0 mm (4.25 in X 5 in)
Compression ratio 16.0:1
Horsepower 194.8 PS (143.2 kW; 192.0 HP) at 2,300 rpm
Starter Electric
Oil capacity: 23.7 L (25 US. qt, 20.9 Imp. qt.)
Coolant capacity: 30.3 L (32 US. qt, 26.7 Imp. qt.)
Transmission and chassis
Chassis 4×2 2WD
Steering type Hydrostatic power
Brakes Differential hydraulic wet discs
Final drive Inboard planetary
Transmission model Power Director
Transmission type Partial power shift
Gears 20 forward and 4 reverse
Speed Forward: 31.2 kmh (19.4 mph) Reverse: 14.0 (8.7 mph)
Transmission oil capacity 28.0 L (7.4 US. gal, 6.2 Imp. gal.)
Transmission model Power Shift
Transmission type Partial power shift
Gears 12 forward and 2 reverse
Speed Forward: 30.7 kmh (19.1 mph) Reverse: 13.2 (8.2 mph)
Transmission oil capacity 26.5 L (7 US. gal, 5.8 Imp. gal.)
Tires
Front tires Ag: 11.00-16
Rear tires Ag: 18.4-38
Three-Point Hitch
Caterogy III/II
Control type
Lift capacity (at 610 mm / 24 in) 3,030 kg (6,680 lbs)
PTO (Power take-off shaft)
Rear PTO type Independent
Rear PTO speed 1,000, 540/1,000 rpm (optional)
Hydraulic system
Hydraulic type Closed center
Valves 2 or 3
Pump flow 22.0 gpm (83.3 lpm)
Steering flow 9.5 gpm (36 lpm)
Total flow 45.0 gpm (170.3 lpm)
ATTENTION! Dear visitors, this site is not a trading platform, an official dealer or a spare parts supplier, so we do not have any price lists, spare parts catalogs, service or owner manuals. We are an information portal and provide the technical specifications.

We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.

Be the first to comment

Leave a Reply

Your email address will not be published.


*