Allis Chalmers 8030

Allis Chalmers 8030The Allis Chalmers 8030 is a 2WD or 4WD row-crop tractor from the 8000 series. This tractor was manufactured by Allis Chalmers in West Allis, Wisconsin, USA from 1982 to 1985. The Allis Chalmers 8030 is equipped with a 7.0 L (426.0 cu·in) six-cylinder diesel engine and one of three transmissions: a partial power shift transmission with 16 forward and 4 reverse gears, a partial power shift transmission with 20 forward and 4 reverse gears or a power shift transmission with 12 forward and 2 reverse gears.

The AC 8030 row-crop tractor used the Allis Chalmers 670T engine. It is a 7.0 L, 6,981 cm2, (426.0 cu·in) six-cylinder turbocharged diesel engine with 108.0 mm (4.25 in) of the cylinder bore and 127.0 mm (5 in) of the piston stroke. The compression ratio rating is 15.5:1. This engine produced 150.1 PS (110.4 kW; 148 HP) at 2,300 rpm of output power.

The Allis Chalmers 8030 is equipped with hydrostatic power steering, differential hydraulic wet discs brakes, the Acousta cab, 227.1 liters (60 US gal.; 50 Imp. gal) fuel tank and 94.6 liters (25 US gal, 20.8 Imp. gal) optional fuel tank.

Allis Chalmers 8030 Specifications

General Specifications
Model Allis Chalmers 8030
Length 4,740 mm (186.6 in)
Width 2,370 mm (93.3 in)
Height (exhaust) 2,870 mm (113 in)
Wheel base 2WD: 2,690 mm (105.9 in)
4WD: 2,430 mm (96.0 in)
Weight (ballasted) 7,760 kg (17,108 lbs)
Fuel tank capacity 227.1 liters (60 US gal.; 50 Imp. gal)
Battery 12V
Cabin type Acousta cab
Engine
Engine model Allis Chalmers 670T
Engine type Four-stroke, liquid-cooled, inline
Cylinders 6
Fuel type Diesel
Displacement 7.0 L, 6,981 cm2, (426.0 cu·in)
Bore and stroke 108.0 mm X 127.0 mm (4.25 in X 5 in)
Compression ratio 15.5:1
Horsepower 150.1 PS (110.4 kW; 148.0 HP) at 2,300 rpm
Starter Electric
Oil capacity: 18.0 L (19 US. qt, 15.8 Imp. qt.)
Coolant capacity: 29.3 L (31 US. qt, 25.8 Imp. qt.)
Transmission and chassis
Chassis 4×2 2WD or 4×4 FWA 4WD (optional)
Steering type Hydrostatic power
Brakes Differential hydraulic wet discs
Transmission model Power Director
Transmission type Partial power shift
Gears 16 forward and 4 reverse
Speed Forward: 30.2 kmh (18.8 mph) Reverse: 13.5 (8.4 mph)
Transmission oil capacity 28.0 L (7.4 US. gal, 6.2 Imp. gal.)
Transmission model Power Director
Transmission type Partial power shift
Gears 20 forward and 4 reverse
Speed Forward: 30.2 kmh (18.8 mph) Reverse: 13.5 (8.4 mph)
Transmission oil capacity 28.0 L (7.4 US. gal, 6.2 Imp. gal.)
Transmission model
Transmission type Power shift
Gears 12 forward and 2 reverse
Speed Forward: 29.6 kmh (18.4 mph) Reverse: 12.7 (7.9 mph)
Transmission oil capacity 28.0 L (7.4 US. gal, 6.2 Imp. gal.)
Tires
Front tires Ag: 10.00-16 (2WD), 13.6-28 (4WD)
Rear tires Ag: 18.4-38
Three-Point Hitch
Caterogy III/II
Control type
Lift capacity (at ends) 3,030 kg (6,680 lbs)
3,720 kg (8,200 lbs) (optional)
PTO (Power take-off shaft)
Rear PTO type Independent
Rear PTO speed 540/1,000 rpm
Hydraulic system
Hydraulic type Closed-center load-sensitive
Valves 2 or 3
Pump flow 22.0 gpm (83.3 lpm)
Transmission: 13.5 gpm (51.1 lpm)
Steering flow 9.5 gpm (36 lpm)
Total flow 45.0 gpm (170.3 lpm)