Allis Chalmers 180

Allis Chalmers 180The Allis Chalmers 180 is a 2WD row-crop tractor manufactured by the Allis Chalmers in West Allis, Wisconsin, USA from 1967 to 1973. The Allis Chalmers 180 is equipped with 4.9 L diesel engine or 4.3 L gasoline engine and partial powershift transmission with 8 forward and 2 reverse gears.

The Allis Chalmers 180 row-crop tractor was available with diesel or gasoline engines. The Allis Chalmers 2800 is a 4.9 L, 4,933 cm2, (301 cu·in) six-cylinder diesel engine with 98.0 mm (3.86 in) of cylinder bore and 108.0 mm (4.25 in) of piston stroke. The compression ratio rating is 16.0:1. Another engine is the Allis Chalmers six-cylinder gasoline engine with 4.3 L, 4,343 cm2, (265 cu·in) of displacement. It has a 95.0 mm (3.74 in) of the cylinder bore and 102.0 mm (4.02 in) of the piston stroke, compression ratio rating is 8.2:1.

The Allis Chalmers 180 is equipped with hydraulic power steering, differential disc brakes, open operator station and 93 liters (24.6 US gal.; 20.5 Imp. gal) fuel tank.

Allis Chalmers 180 Specifications

General Specifications
Model Allis Chalmers 180
Length 4,010 mm (157.9 in)
Width 1,940 mm (76.4 in)
Height 2,110 mm (83.1 in)
Wheel base 2,510 mm (98.8 in)
Weight 4,660 kg (10,274 lbs)
Fuel tank capacity 93 liters (24.6 US gal.; 20.5 Imp. gal)
Battery One or two 12V 95A
Cabin type Open operator station
Engine
Engine model Allis Chalmers 2800
Engine type Four-stroke, liquid-cooled, inline
Cylinders 6
Fuel type Diesel
Displacement 4.9 L, 4,933 cm2, (301 cu·in)
Bore and stroke 98.0 mm X 108.0 mm (3.86 in X 4.25 in)
Compression ratio 16.0:1
Horsepower
Starter Electric
Oil capacity: 9.5 L (10.04 US. qt, 8.36 Imp. qt.)
Coolant capacity: 16.0 L (16.91 US. qt, 14.08 Imp. qt.)
Engine
Engine model Allis Chalmers
Engine type Four-stroke, liquid-cooled, inline
Cylinders 6
Fuel type Gasoline
Displacement 4.3 L, 4,343 cm2, (265 cu·in)
Bore and stroke 95.0 mm X 102.0 mm (3.74 in X 4.02 in)
Compression ratio 8.2:1
Horsepower
Starter Electric
Oil capacity: 11.5 L (12.15 US. qt, 10.12 Imp. qt.)
Transmission and chassis
Chassis 4×2 2WD
Steering type Hydraulic power
Brakes Differential disc
Transmission model Allis-Chalmers Power Director
Transmission type Partial powershift
Gears 8 forward and 2 reverse
Speed Forward: 22.0 kmh (13.7 mph) Reverse: 6.3 (3.9 mph)
Transmission oil capacity 22.7 L (23.99 US. qt, 19.97 Imp. qt.)
Tires
Front tires Ag: 6.50-16; 7.50-16; 9.00-10
Rear tires Ag: 14.9/13-28; 16.9/14-28; 18.4/15-28; 23.1/18-26
Three-Point Hitch
Caterogy II
Control type
Lift capacity
PTO (Power take-off shaft)
Rear PTO type
Rear PTO spped 540 rpm
Hydraulic system
Hydraulic type Open center
Hydraulic capacity 34.0 L (35.93 US. qt, 29.92 Imp. qt.)
Valves 2
Pump flow 10 gpm (37.9 lpm)
Steering flow 5.8 gpm (22 lpm)
ATTENTION! Dear visitors, this site is not a trading platform, an official dealer or a spare parts supplier, so we do not have any price lists, spare parts catalogs, service or owner manuals. We are an information portal and provide the technical specifications.

We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.

Be the first to comment

Leave a Reply

Your email address will not be published.


*