Allis Chalmers 5050

Allis Chalmers 5050The Allis Chalmers 5050 is a 2WD/4WD utility tractor manufactured by the Fiat for Allis Chalmers from 1977 to 1983. The Allis Chalmers 5050 is equipped with 2.7 L three-cylinders diesel engine and partially synchronized transmission with 8 forward and 2 reverse gears.

The Allis Chalmers 5050 utility tractor used 2.7 L, 2,749 cm2, (167.75 cu·in) Fiat three-cylinders diesel engine with 103.0 mm (4.06 in) of cylinder bore and 110.0 mm (4.33 in) of piston stroke. This engine produced 50.7 PS (37.3 kW; 50 HP) at 2,700 rpm of maximum output power.

The Allis Chalmers 5050 is equipped with power steering, differential mechanical contracting band brakes, open operator station (ROPS and canopy was available as an option) and 54.0 liters (14.3 US gal.; 11.9 Imp. gal) fuel tank.

Allis Chalmers 5050 Specifications

General Specifications
Model Allis Chalmers 5050
Length 2WD: 3,030 mm (119.3 in)
4WD: 3,160 mm (124.4 in)
Height 2WD: 1,500 mm (59.3 in)
4WD: 1,530 mm (60.2 in)
Wheel base 2WD: 1,920 mm (75.6 in)
4WD: 1,940 mm (76.4 in)
Weight 3,488 kg (7689.7 lbs)
Fuel tank capacity 54.0 liters (14.3 US gal.; 11.9 Imp. gal)
Battery 12V
Cabin type Open operator station. ROPS and canopy (option).
Engine model Fiat
Engine type Four-stroke, liquid-cooled, inline
Cylinders 3
Fuel type Diesel
Displacement 2.7 L, 2,749 cm2, (167 cu·in)
Bore and stroke 103.0 mm X 110.0 mm (4.06 in X 4.33 in)
Compression ratio 17.0:1
Horsepower 50.7 PS (37.3 kW; 50 HP) at 2,700 rpm
Starter Electric
Oil capacity: 7.7 L (8.14 US. qt, 6.78 Imp. qt.)
Coolant capacity: 13.5 L (14.27 US. qt, 11.88 Imp. qt.)
Transmission and chassis
Chassis 4×2 2WD or 4×4 MFWD 4WD
Steering type Power assist
Brakes Differential mechanical contracting band
Transmission model
Transmission type Partially synchronized
Gears 8 forward and 2 reverse
Speed Forward: 26.4 kmh (16.4 mph) Reverse: 13.4 (8.3 mph)
Transmission oil capacity 18.0 L (19.02 US. qt, 15.84 Imp. qt.)
Front tires Ag: 7.50-16 (2WD); 14.9-28 (4WD)
Rear tires Ag: 8.3-24 (2WD); 14.9-30 (4WD)
Three-Point Hitch
Caterogy II/I
Control type
Lift capacity 1,450 kg (3,197 lbs)
PTO (Power take-off shaft)
Rear PTO type Independent
Rear PTO spped 540 rpm
Hydraulic system
Hydraulic type Open center
Hydraulic capacity 18.0 L (19.02 US. qt, 15.84 Imp. qt.)
Valves 1
Pump flow 6.5 gpm (24.6 lpm)
ATTENTION! Dear visitors, this site is not a trading platform, an official dealer or a spare parts supplier, so we do not have any price lists, spare parts catalogs, service or owner manuals. We are an information portal and provide the technical specifications.

We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.

Be the first to comment

Leave a Reply

Your email address will not be published.