Bobcat CT120

Bobcat CT120The Bobcat CT120 is a 4WD compact utility tractor manufactured by the Daedong for the distributor Bobcat in Daegu, South Korea from 2008 to 2010. The Bobcat CT120 is equipped with a 0.9 L three-cylinder diesel engine and hydrostatic transmission with infinite (2-range) forward and reverse gears.

The Bobcat CT120 compact utility tractor used the Daedong 3C093 engine. It is a 0.9 L, 927 cm2, (56.6 cu·in) three-cylinder natural aspirated diesel engine with 75.0 mm (2.95 in) of the cylinder bore and 70.0 mm (2.76 in) of the piston stroke. This engine produced 21.4 PS (15.7 kW; 21.0 HP) at 2,800 rpm of maximum output power.

The Bobcat CT120 is equipped with a power steering, open operator station with two-post folding ROPS and 20.0 liters (5.3 US gal.; 4.4 Imp. gal) fuel tank.

Following attachments are available for the Bobcat CT120 compact utility tractor:

  • Mid-mount Bobcat 54 in (1,370 mm) mower deck with 3-blades and hydraulic lift
  • Bobcat 6TL loader

Bobcat CT120 Specifications

General Specifications
Model Bobcat CT120
Length 2,680 mm (105.5 in)
Width 1,180 mm (46.5 in)
Height 2,070 mm (81.5 in)
Wheel base 1,470 mm (57.9 in)
Weight 932 kg (2,055 lbs)
Fuel tank capacity 20.0 liters (5.3 US gal.; 4.4 Imp. gal)
Battery 12V
Cabin type Open operator station with two-post folding ROPS
Engine
Engine model Daedong 3C093
Engine type Four-stroke, liquid-cooled, inline
Cylinders 3
Fuel type Diesel
Displacement 0.9 L, 927 cm2, (56.6 cu·in)
Bore and stroke 75.0 mm X 70.0 mm (2.95 in X 2.76 in)
Horsepower 21.4 PS (15.7 kW; 21.0 HP) at 2,800 rpm
Starter Electric
Transmission and chassis
Chassis 4×4 MFWD 4WD
Steering type Power
Brakes
Transmission model
Transmission type Hydrostatic
Gears Infinite (2-range) forward and reverse
Speed Forward: 15.0 kmh (9.3 mph) Reverse: 9.3 (5.8 mph)
Tires
Front tires Ag: 23×8.5-12, 6×12
Lawn/turf: 23×8.5-12
Rear tires Ag: 33×12-16.5, 9.5×16
Lawn/turf: 33×12.5-16.5
Three-Point Hitch
Caterogy I
Control type
Lift capacity (at 610 mm / 24 in) 435 kg (959 lbs)
PTO (Power take-off shaft)
Middle PTO type Optional
Middle PTO spped 2,000 rpm
Rear PTO type Live
Rear PTO spped 540 rpm
Hydraulic system
Hydraulic type
Valves 1
Total flow 7.7 gpm (29.1 lpm)