The Challenger 95E is a agricultural crawler manufactured by Caterpillar from 1998 to 2001. The Challenger 95E is equipped with a 12.0 L (729.2 cu·in) six-cylinder diesel engine and a full powershift transmission with 10 forward and 2 reverse gears.
The Challenger 95E agricultural crawler used the Caterpillar engine. It is a 12.0 L, 11,950 cm2, (729.0 cu·in) six-cylinder turbocharged intercooled diesel engine with 130.0 mm (5.12 in) of the cylinder bore and 150.0 mm (5.91 in) of the piston stroke. The compression ratio rating is 16.0:1. This engine produced 415.8 PS (305.7 kW; 410.0 HP) at 2,100 rpm of output power.
The Challenger 95E is equipped with hydrostatic differential steering, hydraulic caliper disc brakes, Cab (standard), and 1060.0 liters (280 US gal.; 233.2 Imp. gal) fuel tank.
Challenger 95E Specifications
|Wheel base||2,710 mm (106.7 in)|
|Weight||16,100 kg (35,494 lbs)|
|Fuel tank capacity||1060.0 liters (280 US gal.; 233.2 Imp. gal)|
|Cabin type||Cab (standard)|
|Engine type||Four-stroke, liquid-cooled, inline|
|Displacement||12.0 L, 11,950 cm2, (729.0 cu·in)|
|Bore and stroke||130.0 mm X 150.0 mm (5.12 in X 5.91 in)|
|Horsepower||415.8 PS (305.7 kW; 410.0 HP) at 2,100 rpm|
|Coolant capacity:||75.7 L (80 US. qt, 66.6 Imp. qt.)|
|Transmission and chassis|
|Steering type||Hydrostatic differential steering|
|Brakes||Hydraulic caliper disc|
|Transmission type||Full power shift|
|Gears||10 forward and 2 reverse|
|Speed||Forward: 28.9 kmh (18 mph) Reverse: 7.6 (4.7 mph)|
|PTO (Power take-off shaft)|
|Rear PTO type||–|
|Rear PTO speed||1,000 rpm|
|Hydraulic type||Closed center|
|Total flow||40.0 gpm (151.4 lpm)|