Challenger MT565D

Challenger MT565DThe Challenger MT565D is a 4WD row-crop tractor from the MT500D series. This tractor was manufactured by the AGCO in Beauvais, France or Jackson, Minnesota, USA from 2012 to 2014. The Challenger MT565D is equipped with 6.6 L, 6,595 cm2, (402 cu·in) diesel engine and six-speed power shift transmission with 24 forward and reverse gears or continuously variable transmission with infinite forward and reverse.

The Challenger MT565D tractor used 6.6 L, 6595 cm2, (402.45 cu·in) six-cylinder turbocharged and intercooled diesel engine with 108.0 mm (4.25 in) of the cylinder bore and 120.0 mm (4.72 in) of the piston stroke. The compression ratio rating is 17.4:1. This engine produced 202.6 PS (149 kW; 200 HP) at 2,100 rpm of maximum output power. This engine used turbocharger with intercooler, electronic high-pressure common-rail fuel system, and dual-stage dry air cleaner/

The Challenger MT565D is equipped with hydrostatic power steering, hydraulic wet disc brakes, hydraulic or pneumatic trailer brakes (optional), inboard planetary final drive, cabin with air-conditioning (AGCO System 150 or AGCOMMAND was available as an option) and 431.5 liters (114 US gal.; 94.9 Imp. gal) fuel tank.

Challenger MT565D Specifications

General Specifications
Model Challenger MT565D
Length 5,080 mm (200 in)
Width
Height 3,060 mm (120.5 in)
Wheel base 2,990 mm (117.7 in)
Weight 10,500 kg (23,148 lbs)
Fuel tank capacity 431.5 liters (114 US gal.; 94.9 Imp. gal)
Battery Two-600 CCA 12V
Cabin type Cabin with air-conditioning. AGCO System 150 or AGCOMMAND (optional)
Engine
Engine model AGCO Power 66CTA
Engine type Four-stroke, liquid-cooled, inline
Cylinders 6
Fuel type Diesel
Displacement 6.6 L, 6,595 cm2, (402.45 cu·in)
Bore and stroke 108.0 mm X 120.0 mm (4.25 in X 4.72 in)
Compression ratio 17.4:1
Horsepower 202.6 PS (149 kW; 199.8 HP) at 2100 rpm
Starter electric
Transmission and chassis
Chassis 4×4 MFWD 4WD
Steering type Hydrostatic power
Brakes Hydraulic wet disc;
Trailer brakes Hydraulic or pneumatic (optional)
Final drive Inboard planetary
Transmission model AutoPower VI
Transmission type Six-speed power shift
Gears 24 forward and reverse
Transmission model TechStar CVT
Transmission type Continuously variable transmission
Gears Infinite forward and reverse
Tires
Front tires 420/85R28
Rear tires 480/80R42
Three-Point Hitch
Caterogy III/IIIN
Control type Electronic lower link draft control
Lift capacity 5,670 kg (12,502 lbs)
PTO (Power take-off shaft)
Rear PTO type Independent with electro-hydraulic clutch
Rear PTO speed 540/1000, 540/540E/1000 or 540E/1000E/1000 rpm
Hydraulic system
Hydraulic type Closed center load sensing
Hydraulic capacity 100 L (105.67 US. qt, 87.99 Imp. qt.)
Pressure 2900 psi (199.9 bar)
Valves 2 to 4
Total flow 29 gpm (109.8 lpm)
ATTENTION! Dear visitors, this site is not a trading platform, an official dealer or a spare parts supplier, so we do not have any price lists, spare parts catalogs, service or owner manuals. We are an information portal and provide the technical specifications.

We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.

Be the first to comment

Leave a Reply

Your email address will not be published.


*