Challenger 1050

Challenger 1050The Challenger 1050 is a 4WD row-crop tractor from the 1000 series. This tractor has been manufactured by Challenger (a part of AGCO) in Marktoberdoft, Germany since 2017. The Challenger 1050 is equipped with a 12.4 L (756.7 cu·in) six-cylinder diesel engine and a continuously-variable transmission with infinite forward and reverse gears.

The Challenger 1050 row-crop tractor used the MAN engine. It is a 12.4 L, 12,400 cm2, (756.7 cu·in) six-cylinder turbocharged diesel engine with 126.0 mm (4.96 in) of the cylinder bore and 166.0 mm (6.54 in) of the piston stroke. This engine produced 524.3 PS (385.5 kW; 517.0 HP) at 1,700 rpm of output power and 2400 N·m (244.7 kg·m, 1768.8 ft·lb) at 1,450 rpm of torque.

The Challenger 1050 is equipped with power steering, hydraulic wet disc brakes, cab with air-conditioning, and 798.6 liters (211.0 US gal.; 175.7 Imp. gal) fuel tank.

Challenger 1050 Specifications

General Specifications
Model Challenger 1050
Length 6,140 mm (241.7 in)
Width 3,000 mm (118.1 in)
Height (cab) 3,560 mm (140.2 in)
Wheel base 3,300 mm (129.9 in)
Ground clearance 590 mm (23.2 in)
Weight (shipping) 14,850 kg (32,739 lbs)
Fuel tank capacity 798.6 liters (211.0 US gal.; 175.7 Imp. gal)
Battery Two 12V
Cabin type Cab with air-conditioning
Engine
Engine model MAN
Engine type Four-stroke, liquid-cooled, inline
Cylinders 6
Fuel type Diesel
Displacement 12.4 L, 12,400 cm2, (756.7 cu·in)
Bore and stroke 126.0 mm X 166.0 mm (4.96 in X 6.54 in)
Horsepower 524.3 PS (385.5 kW; 517.0 HP) at 1,700 rpm
Torque 2400 N·m (244.7 kg·m, 1768.8 ft·lb) at 1,450 rpm
Starter Electric
Transmission and chassis
Chassis 4×4 MFWD 4WD
Steering type Power
Brakes Hydraulic wet disc
Transmission model Accu-VT
Transmission type Continuously-variable transmission
Gears Infinite forward and reverse
Tires
Front tires Ag: 650/65R38
Rear tires Ag: 750/75R46
Three-Point Hitch
Category IV/IVN
Control type
Lift capacity (at ends) 8,450 kg (18,630 lbs)
PTO (Power take-off shaft)
Rear PTO type Independent
Rear PTO speed 1000/1000E rpm
Hydraulic system
Hydraulic type Load-sensing
Valves Up to 6
Pump flow 58.0 gpm (219.6 lpm)
113.5 gpm (429.6 lpm)
ATTENTION! Dear visitors, this site is not a trading platform, an official dealer or a spare parts supplier, so we do not have any price lists, spare parts catalogs, service or owner manuals. We are an information portal and provide the technical specifications.

We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.

Be the first to comment

Leave a Reply

Your email address will not be published.


*