Cub Cadet XT3 GSX

Cub Cadet XT3 GSXThe Cub Cadet XT3 GSX is a 2WD garden tractor from the XT3 Enduro series. This tractor was manufactured by Cub Cadet (a part of MTD) in from 2015 to . The Cub Cadet XT3 GSX is equipped with a 0.7 L (44.0 cu·in) V-twin gasoline engine and a shaft-driven hydrostatic transmission with infinite forward and reverse gears.

The Cub Cadet XT3 GSX garden tractor used the Kohler CH740 engine. It is a 0.7 L, 721 cm2, (44.0 cu·in) V-twin natural aspirated gasoline engine with 83.0 mm (3.27 in) of the cylinder bore and 67.0 mm (2.64 in) of the piston stroke. This engine produced 25.3 PS (18.6 kW; 25.0 HP) of output power.

The Cub Cadet XT3 GSX is equipped with electric power steering, disc brakes, an open operator station, and 12.5 liters (3.3 US gal.; 2.7 Imp. gal) fuel tank.

Following attachments are available for the Cub Cadet XT3 GSX garden tractor:

  • Mid-mount Cub Cadet 42 in (1,060 mm) mower deck with 2-blade and electric lift
  • Mid-mount Cub Cadet 50 in (1,270 mm) mower deck with 3-blade and electric lift
  • Mid-mount Cub Cadet 54 in (1,370 mm) mower deck with 3-blade and electric lift
  • Mid-mount Cub Cadet 60 in (1,520 mm) mower deck with 3-blade and electric lift
  • Front-mount Cub Cadet 46 in (1,160 mm) blade
  • Front-mount Cub Cadet 42 in (1,060 mm) three-stage snowblower

Cub Cadet XT3 GSX Specifications

General Specifications
Model Cub Cadet XT3 GSX
Length –
Width –
Height –
Wheel base 1,280 mm (50.4 in)
Weight 362 kg (798 lbs)
Fuel tank capacity 12.5 liters (3.3 US gal.; 2.7 Imp. gal)
Battery 12V, CCA 300A
Cabin type Open operator station
Engine
Engine model Kohler CH740
Engine type Four-stroke, air-cooled, V-twin
Cylinders 2
Fuel type Gasoline
Displacement 0.7 L, 721 cm2, (44.0 cu·in)
Bore and stroke 83.0 mm X 67.0 mm (3.27 in X 2.64 in)
Horsepower 25.3 PS (18.6 kW; 25.0 HP)
Starter Electric
Oil capacity: 1.8 L (1.9 US. qt, 1.6 Imp. qt.)
Transmission and chassis
Chassis 4×2 2WD
Steering type Electric power
Brakes Disc
Differential lock Mechanical rear
Transmission model Hydro-Gear BDU-10
Transmission type Shaft-driven hydrostatic
Gears Infinite forward and reverse
Speed Forward: 10.5 kmh (6.5 mph) Reverse: 5.6 kmh (3.5 mph)
Tires
Front tires Lawn/turf: 16×6.5-8
Rear tires Lawn/turf: 23×10.5-8
PTO (Power take-off shaft)
Front PTO type Independent with electric clutch
Front PTO speed –

Be the first to comment

Leave a Reply

Your email address will not be published.


*