The Fiat 480 is a 2WD or 4WD tractor manufactured by Fiat from 1973 to 1984. The Fiat 480 is equipped with a 2.6 L (158.1 cu·in) three-cylinder diesel engine and one of two transmissions with 6 forward and 2 reverse gears or 8 forward and 2 reverse gears.
The Fiat 480 tractor used the Fiat 8035.02 engine. It is a 2.6 L, 2,590 cm2, (158.1 cu·in) three-cylinder natural aspirated diesel engine with 100.0 mm (3.94 in) of the cylinder bore and 110.0 mm (4.33 in) of the piston stroke. This engine produced 48.7 PS (35.8 kW; 48.0 HP) at 2,600 rpm of output power.
Fiat 480 Specifications
General Specifications | |
Model | Fiat 480 |
Length | 3,440 mm (135.4 in) |
Width | – |
Height | – |
Wheel base | 1,990 mm (78.3 in) |
Weight |
2WD: 2,000 kg (4,410 lbs) 4WD: 2,240 kg (4,940 lbs) |
Fuel tank capacity | 54.0 liters (14.3 US gal.; 11.9 Imp. gal) |
Battery | – |
Cabin type | Open operator station |
Engine | |
Engine model | Fiat 8035.02 |
Engine type | Four-stroke, liquid-cooled, inline |
Cylinders | 3 |
Fuel type | Diesel |
Displacement | 2.6 L, 2,590 cm2, (158.1 cu·in) |
Bore and stroke | 100.0 mm X 110.0 mm (3.94 in X 4.33 in) |
Horsepower | 48.7 PS (35.8 kW; 48.0 HP) at 2,600 rpm |
Starter | Electric |
Transmission and chassis | |
Chassis | 4×2 2WD or 4×4 MFWD 4WD |
Steering type | Manual |
Brakes | Mechanical band |
Transmission model | – |
Transmission type | – |
Gears | 6 forward and 2 reverse |
Transmission model | – |
Transmission type | – |
Gears | 8 forward and 2 reverse |
Tires | |
Front tires | Ag: 7.50-16 (2WD), 8.3-24 (4WD) |
Rear tires | Ag: 12.4-32, 14.9-28 |
Three-Point Hitch | |
Caterogy | I |
Control type | – |
Lift capacity (at ends) | 1,550 kg (3,420 lbs) |
PTO (Power take-off shaft) | |
Rear PTO type | – |
Rear PTO speed | 540 rpm |
Hydraulic system | |
Hydraulic type | – |
Pump flow | 6.3 gpm (23.8 lpm) |