International Harvester 1206

International Harvester 1206The International Harvester 1206 Turbo is a 2WD or 4WD tractor manufactured by International Harvester from 1965 to 1967. The International Harvester 1206 is equipped with a 5.9 L (361.0 cu·in) six-cylinder diesel engine and one of two transmissions: an unsynchronized gear type transmission with 8 forward and 4 reverse gears or a partial power shift transmission with 16 forward and 8 reverse gears.

The International Harvester 1206 tractor used the International Harvester DT361 engine. It is a 5.9 L, 5,915 cm2, (361.0 cu·in) six-cylinder turbocharged diesel engine with 105.0 mm (4.13 in) of the cylinder bore and 108.0 mm (4.25 in) of the piston stroke. The compression ratio rating is 17.0:1. This engine produced 111.5 PS (82.0 kW; 110.0 HP) of output power.

The IH 1206 Turbo is equipped with hydrostatic power steering, differential hydraulic dry disc brakes, open operator station or cab (optional) and 132.5 liters (35 US gal.; 29.1 Imp. gal) fuel tank.

International Harvester 1206 Specifications

General Specifications
ModelInternational Harvester 1206
Length3,890 mm (153.1 in)
Height2,180 mm (85.8 in)
Wheel base
Weight4,590 kg (10,119 lbs)
Fuel tank capacity132.5 liters (35 US gal.; 29.1 Imp. gal)
BatteryTwo 6V
Cabin typeOpen operator station or Cab (optional)
Engine modelInternational Harvester DT361
Engine typeFour-stroke, liquid-cooled, inline
Fuel typeDiesel
Displacement5.9 L, 5,915 cm2, (361.0 cu·in)
Bore and stroke105.0 mm X 108.0 mm (4.13 in X 4.25 in)
Compression ratio17.0:1
Horsepower111.5 PS (82.0 kW; 110.0 HP)
Transmission and chassis
Chassis4×2 2WD or 4×4 FWA 4WD (optional)
Steering typeHydrostatic power
BrakesDifferential hydraulic dry disc
Transmission model
Transmission typeUnsynchronized gear type
Gears8 forward and 4 reverse
Transmission modelTorque Amplifier
Transmission typePartial power shift
Gears16 forward and 8 reverse
Speed Forward: 31.4 kmh (19.5 mph) Reverse: 15.3 (9.5 mph)
Front tiresAg: 7.50-16
Rear tiresAg: 18.4-38
Three-Point Hitch
CaterogyIII or IH Fast Hitch
Control type
Lift capacity (at ends)
PTO (Power take-off shaft)
Rear PTO typeIndependent
Rear PTO speed1,000 rpm
Hydraulic system
Hydraulic type
Valves0 to 2
Pump flow12.0 gpm (45.4 lpm)
ATTENTION! Dear visitors, this site is not a trading platform, an official dealer or a spare parts supplier, so we do not have any price lists, spare parts catalogs, service or owner manuals. We are an information portal and provide the technical specifications.

We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.

Be the first to comment

Leave a Reply

Your email address will not be published.