International Harvester 1568

International Harvester 1568The International Harvester 1568 is a 2WD row-crop tractor from the 66 series. This tractor was manufactured by International Harvester from 1974 to 1976. The International Harvester 1568 is equipped with a 9.0 L (548.7 cu·in) eight-cylinder diesel engine and a partial power shift transmission with 12 forward and 6 reverse gears.

The International 1568 row-crop tractor used the International DV-550 engine. It is a 9.0 L, 8,991 cm2, (548.7 cu·in) eight-cylinder natural aspirated diesel engine with 110.0 mm (4.33 in) of the cylinder bore and 114.0 mm (4.49 in) of the piston stroke. The compression ratio rating is 16.6:1.

The IH 1568 is equipped with hydrostatic power steering, hydraulic wet disc brakes, cab (standard), and 159.0 liters (42 US gal.; 35 Imp. gal) fuel tank.

International Harvester 1568 Specifications

General Specifications
ModelInternational Harvester 1568
Length
Width
Height
Wheel base2,660 mm (104.7 in)
Ground clearance
Weight5,880 kg (12,963 lbs)
Fuel tank capacity159.0 liters (42 US gal.; 35 Imp. gal)
Battery6V
Cabin typeCab
Engine
Engine modelInternational DV-550
Engine typeFour-stroke, liquid-cooled, V
Cylinders8
Fuel typeDiesel
Displacement9.0 L, 8,991 cm2, (548.7 cu·in)
Bore and stroke110.0 mm X 114.0 mm (4.33 in X 4.49 in)
Compression ratio16.6:1
Horsepower
StarterElectric
Coolant capacity:28.4 L (30 US. qt, 25 Imp. qt.)
Transmission and chassis
Chassis4×2 2WD
Steering typeHydrostatic power
BrakesHydraulic wet disc
Transmission model
Transmission typePartial power shift
Gears12 forward and 6 reverse
Tires
Front tires Ag: 11L-15
Rear tires Ag: 20.8-38
Three-Point Hitch
CategoryIII/II
Control type
Lift capacity (at ends)
PTO (Power take-off shaft)
Rear PTO typeIndependent
Rear PTO speed1,000 rpm
Hydraulic system
Hydraulic typeOpen center
Valves1
Pump flow12.0 gpm (45.4 lpm)
ATTENTION! Dear visitors, this site is not a trading platform, an official dealer or a spare parts supplier, so we do not have any price lists, spare parts catalogs, service or owner manuals. We are an information portal and provide the technical specifications.

We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.

Be the first to comment

Leave a Reply

Your email address will not be published.


*