International Harvester 244

International Harvester 244The International Harvester 244 is a 2WD or 4WD compact utility tractor manufactured by Mitsubishi for distributor International Harvester in Japan from 1982 to 1984. The International 244 is equipped with a 1.0 L (59.7 cu·in) three-cylinder diesel engine and a continuous mesh transmission with 9 forward and 3 reverse gears.

The IH 244 compact utility tractor used the Mitsubishi engine. It is a 1.0 L, 979 cm2, (59.7 cu·in) three-cylinder natural aspirated diesel engine with 73.0 mm (2.87 in) of the cylinder bore and 78.0 mm (3.07 in) of the piston stroke. This engine produced 21.4 PS (15.7 kW; 21.0 HP) at 2,700 rpm of output power.

International Harvester 244 Specifications

General Specifications
ModelInternational Harvester 244
Length2,870 mm (113 in)
Width1,100 mm (43.3 in)
Height1,340 mm (52.8 in)
Wheel base1,520 mm (59.8 in)
Ground clearance340 mm (13.4 in)
Weight780 kg (1,720 lbs)
Fuel tank capacity20.8 liters (5.5 US gal.; 4.6 Imp. gal)
Cabin typeTwo-post ROPS
Engine modelMitsubishi
Engine typeFour-stroke, liquid-cooled, inline
Fuel typeDiesel
Displacement1.0 L, 979 cm2, (59.7 cu·in)
Bore and stroke73.0 mm X 78.0 mm (2.87 in X 3.07 in)
Horsepower21.4 PS (15.7 kW; 21.0 HP) at 2,700 rpm
Oil capacity:4.2 L (4.4 US. qt, 3.7 Imp. qt.)
Coolant capacity:4.9 L (5.2 US. qt, 4.3 Imp. qt.)
Transmission and chassis
Chassis4×2 2WD or 4×4 MFWD 4WD
Steering type
Transmission model
Transmission typeContinuous mesh
Gears9 forward and 3 reverse
Speed Forward: 18.8 kmh (11.7 mph) Reverse: 12.6 (7.8 mph)
Transmission oil capacity25.0 L (6.6 US. gal, 5.5 Imp. gal.)
Front tiresAg:
Rear tiresAg:
Three-Point Hitch
Control type
Lift capacity (at ends)
PTO (Power take-off shaft)
Rear PTO typeLive
Rear PTO speed540/1,250 rpm
Hydraulic system
Hydraulic type
Hydraulic capacity25.0 L (6.6 US. gal, 5.5 Imp. gal.)
ATTENTION! Dear visitors, this site is not a trading platform, an official dealer or a spare parts supplier, so we do not have any price lists, spare parts catalogs, service or owner manuals. We are an information portal and provide the technical specifications.

We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.

Be the first to comment

Leave a Reply

Your email address will not be published.