International Harvester 254 is a 2WD or 4WD compact utility tractor manufactured by Mitsubishi in Japan for distributor International Harvester from 1982 to 1984. The International 254 is equipped with a 1.1 L (64.7 cu·in) three-cylinder diesel engine and a continuous mesh transmission with 9 forward and 3 reverse gears.
The IH 254 compact utility tractor used the Mitsubishi engine. It is a 1.1 L, 1,060 cm2 , (64.7 cu·in) three-cylinder natural aspirated diesel engine with 76.0 mm (2.99 in) of the cylinder bore and 78.0 mm (3.07 in) of the piston stroke. This engine produced 24.3 PS (17.9 kW; 24.0 HP) at 2,800 rpm of output power.
International Harvester 254 Specifications
General Specifications
Model
International Harvester 254
Length
2,870 mm (113 in)
Width
1,160 mm (45.7 in)
Height
1,360 mm (53.5 in)
Wheel base
1,520 mm (59.8 in)
Ground clearance
360 mm (14.2 in)
Weight
800 kg (1,764 lbs)
Fuel tank capacity
20.8 liters (5.5 US gal.; 4.6 Imp. gal)
Battery
12V
Cabin type
Two-post ROPS
Engine
Engine model
Mitsubishi
Engine type
Four-stroke, liquid-cooled, inline
Cylinders
3
Fuel type
Diesel
Displacement
1.1 L, 1,060 cm2 , (64.7 cu·in)
Bore and stroke
76.0 mm X 78.0 mm (2.99 in X 3.07 in)
Horsepower
24.3 PS (17.9 kW; 24 HP) at 2,800 rpm
Starter
Electric
Oil capacity:
4.2 L (4.4 US. qt, 3.7 Imp. qt.)
Coolant capacity:
4.9 L (5.2 US. qt, 4.3 Imp. qt.)
Transmission and chassis
Chassis
4×2 2WD or 4×4 MFWD 4WD
Steering type
–
Brakes
–
Transmission model
–
Transmission type
Continuous mesh
Gears
9 forward and 3 reverse
Speed
Forward: 20.3 kmh (12.6 mph) Reverse: 13.6 (8.5 mph)
Transmission oil capacity
25.0 L (6.6 US. gal, 5.5 Imp. gal.)
Tires
Front tires
Ag: 5.00-15
Rear tires
Ag: 11.2-24
Three-Point Hitch
Caterogy
I
Control type
–
Lift capacity (at ends)
–
PTO (Power take-off shaft)
Rear PTO type
Live
Rear PTO speed
540/1,250 rpm
Hydraulic system
Hydraulic type
–
Hydraulic capacity
25.0 L (6.6 US. gal, 5.5 Imp. gal.)
Pump flow
4.2 gpm (15.9 lpm)
ATTENTION! Dear visitors, this site is not a trading platform, an official dealer or a spare parts supplier, so we do not have any price lists, spare parts catalogs, service or owner manuals. We are an information portal and provide the technical specifications.We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.
The International Harvester 254 is a 2WD or 4WD compact utility tractor manufactured by Mitsubishi in Japan for distributor International Harvester from 1982 to 1984. The International 254 is equipped with a 1.1 L (64.7 cu·in) three-cylinder diesel engine and a continuous mesh transmission with 9 forward and 3 reverse gears.
Be the first to comment