International Harvester 340

International Harvester 340The International Harvester 340 is a 2WD utility tractor manufactured by International Harvester from 1958 to 1963.

The International 340 is equipped with one of two engines: a 2.2 L (135.0 cu·in) four-cylinder gasoline engine or a 2.7 L (166.0 cu·in) four-cylinder diesel engine and one of three transmissions: a sliding gear transmission with 5 forward and 1 reverse gears, a partial power shift transmission with 10 forward and 2 reverse gears or the Fast Reverser transmission with 5 forward and 5 reverse gears.

The tractor could be equipped with the following engines:

  • International Harvester C-135. It is a 2.2 L, 2,212 cm2, (135.0 cu·in) four-cylinder natural aspirated gasoline engine with 83.0 mm (3.27 in) of the cylinder bore and 103.0 mm (4.06 in) of the piston stroke. The compression ratio rating is 7.6:1. This engine produced 47.6 PS (35.0 kW; 47.0 HP) at 2,000 rpm of output power.
  • International Harvester D-166. It is a 2.7 L, 2,720 cm2, (166.0 cu·in) four-cylinder natural aspirated diesel engine. The cylinder bore is 94.0 mm (3.7 in) and the piston stroke is 98.0 mm (3.86 in). The compression ratio rating is 19.2:1. This engine produced 47.6 PS (35.0 kW; 47.0 HP) at 2,000 rpm of output power.

The IH 340 is equipped with manual or hydrostatic power (optional) steering, independent mechanical disc brakes, an open operator station, and 58.0 liters (15.3 US gal.; 12.8 Imp. gal) fuel tank.

Following attachments are available for the International Harvester 340 utility tractor:

  • International Harvester 2001 loader with single-acting or double-acting lift cylinders
  • International Harvester 2000 loader
  • IH-Wagner 95 backhoe
  • IH-Wagner 1250 backhoe

International Harvester 340 Specifications

General Specifications
ModelInternational Harvester 340
Length2,970 mm (116.9 in)
Width2,280 mm (89.8 in)
Height1,490 mm (58.7 in)
Wheel base1,860 mm (73.2 in)
Ground clearance330 mm (13 in)
Weight Gas: 1,965 kg (4,330 lbs)
Diesel: 2,030 kg (4,470 lbs)
Fuel tank capacity58.0 liters (15.3 US gal.; 12.8 Imp. gal)
BatteryGas: 6V, Diesel: 12V
Cabin typeOpen operator station
Engine
Engine modelInternational Harvester C-135
Engine typeFour-stroke, liquid-cooled, inline
Cylinders4
Fuel typeGasoline
Displacement2.2 L, 2,212 cm2, (135.0 cu·in)
Bore and stroke83.0 mm X 103.0 mm (3.27 in X 4.06 in)
Compression ratio7.6:1
Horsepower47.6 PS (35.0 kW; 47.0 HP) at 2,000 rpm
Torque173.6 N·m (17.7 kg·m, 127.9 ft·lb) at 1,200 rpm
StarterElectric
Oil capacity:4.7 L (5 US. qt, 4.1 Imp. qt.)
Coolant capacity:14.2 L (15 US. qt, 12.5 Imp. qt.)
Engine
Engine modelInternational Harvester D-166
Engine typeFour-stroke, liquid-cooled, inline
Cylinders4
Fuel typeDiesel
Displacement2.7 L, 2,720 cm2, (166.0 cu·in)
Bore and stroke94.0 mm X 98.0 mm (3.7 in X 3.86 in)
Compression ratio19.2:1
Horsepower47.6 PS (35.0 kW; 46.9 HP) at 2,000 rpm
Torque173.6 N·m (17.7 kg·m, 127.9 ft·lb) at 1,400 rpm
StarterElectric
Oil capacity:6.6 L (7 US. qt, 5.8 Imp. qt.)
Coolant capacity:17.6 L (18.6 US. qt, 15.5 Imp. qt.)
Transmission and chassis
Chassis4×2 2WD
Steering typeManual or hydrostatic power optional
BrakesIndependent mechanical disc
Transmission modelInternational Harvester
Transmission typeSliding gear
Gears5 forward and 1 reverse
Speed Forward: 25.9 kmh (16.1 mph) Reverse: 3.6 (2.2 mph)
Transmission oil capacity37.9 L (10 US. gal, 8.3 Imp. gal.)
Transmission modelInternational Harvester Torque Amplifier
Transmission typePartial power shift
Gears10 forward and 2 reverse
Speed Forward: 25.9 kmh (16.1 mph) Reverse: 3.6 (2.2 mph)
Transmission oil capacity37.9 L (10 US. gal, 8.3 Imp. gal.)
Transmission modelFast Reverser
Transmission type
Gears5 forward and 5 reverse
Speed Forward: 25.9 kmh (16.1 mph) Reverse: 31.7 (19.7 mph)
Transmission oil capacity37.9 L (10 US. gal, 8.3 Imp. gal.)
Tires
Front tiresAg: 5.50-16
Rear tiresAg: 11-28
Three-Point Hitch
CaterogyIH Fast Hitch
Control type
Lift capacity (at ends)
PTO (Power take-off shaft)
Rear PTO typeIndependent
Rear PTO speed540 rpm
Hydraulic system
Hydraulic type
Valves0 to 3
Steering flow2.5 gpm (9.5 lpm)
ATTENTION! Dear visitors, this site is not a trading platform, an official dealer or a spare parts supplier, so we do not have any price lists, spare parts catalogs, service or owner manuals. We are an information portal and provide the technical specifications.

We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.

Be the first to comment

Leave a Reply

Your email address will not be published.


*