The International Harvester 384 is a 2WD utility tractor manufactured by International Harvester in Bradford, England from 1977 to 1982. The International 384 is equipped with a 2.5 L (154.0 cu·in) four-cylinder diesel engine and a unsynchronized gear transmission with 8 forward and 2 reverse gears.
The IH 384 utility tractor used the International Harvester BD-154 engine. It is a 2.5 L, 2,523 cm2, (154.0 cu·in) four-cylinder natural aspirated diesel engine with 89.0 mm (3.5 in) of the cylinder bore and 102.0 mm (4.02 in) of the piston stroke. This engine produced 36.4 PS (26.8 kW; 36.0 HP) at 2,100 rpm of output power.
International Harvester 384 Specifications
General Specifications |
Model |
International 384 |
Length |
3,320 mm (130.7 in) |
Width |
1,690 mm (66.5 in) |
Height |
1,490 mm (58.7 in) |
Wheel base |
1,940 mm (76.4 in) |
Ground clearance |
460 mm (18.1 in) |
Weight |
1,920 kg (4,233 lbs) |
Fuel tank capacity |
45.4 liters (12 US gal.; 10 Imp. gal) |
Battery |
12V, CCA: 605A |
Cabin type |
Open operator station |
Engine |
Engine model |
International Harvester BD-154 |
Engine type |
Four-stroke, liquid-cooled, inline |
Cylinders |
4 |
Fuel type |
Diesel |
Displacement |
2.5 L, 2,523 cm2, (154.0 cu·in) |
Bore and stroke |
89.0 mm X 102.0 mm (3.5 in X 4.02 in) |
Horsepower |
36.4 PS (26.8 kW; 36.0 HP) at 2,100 rpm |
Starter |
Electric |
Oil capacity: |
7.6 L (8 US. qt, 6.7 Imp. qt.) |
Coolant capacity: |
10.2 L (10.8 US. qt, 9 Imp. qt.) |
Transmission and chassis |
Chassis |
4×2 2WD |
Steering type |
– |
Brakes |
– |
Transmission model |
– |
Transmission type |
Unsynchronized gear |
Gears |
8 forward and 2 reverse |
Speed |
Forward: 26.3 kmh (16.3 mph) Reverse: 11.0 (6.8 mph) |
Transmission oil capacity |
35.3 L (9.3 US. gal, 7.8 Imp. gal.) |
Tires |
Front tires |
Ag: 6.00-16 |
Rear tires |
Ag: 13.6-28 |
Three-Point Hitch |
Caterogy |
I |
Control type |
– |
Lift capacity (at ends) |
1,180 kg (2,600 lbs) |
PTO (Power take-off shaft) |
Rear PTO type |
– |
Rear PTO speed |
540 rpm |
Hydraulic system |
Hydraulic type |
Open center |
Pump flow |
7.8 gpm (29.5 lpm) |