International Harvester 424

International Harvester 424The International Harvester 424 is a 2WD utility tractor from manufactured by International Harvester in Doncaster, England or Louisville, Kentucky, USA from 1964 to 1967.

The International Harvester 424 is equipped with one of two engines: a 2.4 L (145.3 cu·in) four-cylinder gasoline engine or a 2.5 L (154.0 cu·in) four-cylinder diesel engine and a sliding gear with dry disc clutch transmission with 8 forward and 2 reverse gears.

The tractor could be equipped with the following engines:

  • International Harvester C-146. It is a 2.4 L, 2,381 cm2, (145.3 cu·in) four-cylinder natural aspirated gasoline engine with 86.0 mm (3.39 in) of the cylinder bore and 103.0 mm (4.06 in) of the piston stroke. The compression ratio rating is 7.6:1. This engine produced 37.5 PS (27.6 kW; 37.0 HP) at 2,000 rpm of output power.
  • International Harvester BD-154. It is a 2.5 L, 2,524 cm2, (154.0 cu·in) four-cylinder natural aspirated diesel engine. The cylinder bore is 89.0 mm (3.5 in) and the piston stroke is 102.0 mm (4.02 in). The compression ratio rating is 23.1:1.

The IH 424 is equipped with power assist steering, differential mechanical dry disc brakes, an open operator station and 53.0 liters (14 US gal.; 11.7 Imp. gal) fuel tank.

Following attachments are available for the International 424 utility tractor:

  • International Harvester 1501 loader
  • International Harvester 2001 loader

International Harvester 424 Specifications

General Specifications
ModelInternational Harvester 424
Length3,070 mm (120.9 in)
Width1,700 mm (66.9 in)
Height1,440 mm (56.7 in)
Wheel base1,770 mm (69.7 in)
Weight1,840 kg (4,057 lbs)
Fuel tank capacity53.0 liters (14 US gal.; 11.7 Imp. gal)
Cabin typeOpen operator station
Engine modelInternational Harvester C-146
Engine typeFour-stroke, liquid-cooled, inline
Fuel typeGasoline
Displacement2.4 L, 2,381 cm2, (145.3 cu·in)
Bore and stroke86.0 mm X 103.0 mm (3.39 in X 4.06 in)
Compression ratio7.6:1
Horsepower37.5 PS (27.6 kW; 37.0 HP) at 2,000 rpm
Engine modelInternational Harvester BD-154
Engine typeFour-stroke, liquid-cooled, inline
Fuel typeDiesel
Displacement2.5 L, 2,524 cm2, (154.0 cu·in)
Bore and stroke89.0 mm X 102.0 mm (3.5 in X 4.02 in)
Compression ratio23.1:1
Transmission and chassis
Chassis4×2 2WD
Steering typePower assist
BrakesDifferential mechanical dry disc
Transmission model
Transmission typeSliding gear with dry disc clutch
Gears8 forward and 2 reverse
Speed Forward: 25.0 kmh (15.5 mph) Reverse: 10.5 (6.5 mph)
Transmission oil capacity18.9 L (5 US. gal, 4.2 Imp. gal.)
Front tiresAg: 5.50-16
Rear tiresAg: 12.4-28
Three-Point Hitch
Control type
Lift capacity (at ends)
PTO (Power take-off shaft)
Rear PTO typeLive
Rear PTO speed540 rpm
ATTENTION! Dear visitors, this site is not a trading platform, an official dealer or a spare parts supplier, so we do not have any price lists, spare parts catalogs, service or owner manuals. We are an information portal and provide the technical specifications.

We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.

Be the first to comment

Leave a Reply

Your email address will not be published.