International 5288 row-crop tractor: review and specs

The International Harvester 5288 is a 2WD or 4WD row-crop tractor from the 50 series. This tractor was manufactured by International Harvester in Rock Island, Illinois, USA from 1981 to 1985. The International Harvester 5288 is equipped with a 7.6 L (466.0 cu·in) six-cylinder diesel engine and a partial power shift transmission with 18 forward and 6 reverse gears.

The IH 5288 row-crop tractor used the International Harvester DT-466B engine. It is a 7.6 L, 7,636 cm², (466.0 cu·in) six-cylinder turbocharged diesel engine with 109.0 mm (4.29 in) of the cylinder bore and 136.0 mm (5.35 in) of the piston stroke. This engine produced 162.2 PS (119.3 kW; 160.0 HP) at 2,400 rpm of PTO output power.

The International 5288 is equipped with hydrostatic power steering, wet disc brakes, cab standard with heat and A/C, and 329.3 liters (87 US gal.; 72.4 Imp. gal) fuel tank.

International Harvester 5288 Specifications

General Specifications
Model	International Harvester 5288
Length	4,990 mm (196.5 in)
Width	2,840 mm (111.8 in)
Height	2,940 mm (115.7 in)
Wheel base	2,830 mm (111.4 in)
Ground clearance	460 mm (18.1 in)
Weight (operating)	7,740 kg (17,064 lbs)
Fuel tank capacity	329.3 liters (87 US gal.; 72.4 Imp. gal)
Battery	12V
Cabin type	Cab standard with heat and A/C
Engine
Engine model	International Harvester DT-466B
Engine type	Four-stroke, liquid-cooled, inline
Cylinders	6
Fuel type	Diesel
Displacement	7.6 L, 7,636 cm², (466.0 cu·in)
Bore and stroke	109.0 mm X 136.0 mm (4.29 in X 5.35 in)
Horsepower	162.2 PS (119.3 kW; 160.0 HP) at 2,400 rpm
Starter	Electric
Oil capacity:	18.9 L (20 US. qt, 16.6 Imp. qt.)
Coolant capacity:	31.2 L (33 US. qt, 27.5 Imp. qt.)

Transmission and chassis
Chassis	4×2 2WD or 4×4 MFWD 4WD
Steering type	Hydrostatic power
Brakes	Wet disc
Transmission model	Synchro Tri-Six (STS)
Transmission type	Partial power shift
Gears	18 forward and 6 reverse
Speed	Forward: 29.6 kmh (18.4 mph) Reverse: 9.8 (6.1 mph)
Transmission oil capacity	164.7 L (43.5 US. gal, 36.2 Imp. gal.)
Tires
Front tires	Ag: 14L-16.1
Rear tires	Ag: 20.8-38

Three-Point Hitch
Category	III
Control type	–
Lift capacity (at ends)	3,663 kg (8,075 lbs)
PTO (Power take-off shaft)
Rear PTO type	Independent
Rear PTO speed	1,000 rpm
Hydraulic system
Hydraulic type	Closed center
Hydraulic capacity	164.6 L (43.5 US. gal, 36.2 Imp. gal.)
Valves	2
Pump flow	25.0 gpm (94.6 lpm) Optional: 40.0 gpm (151.4 lpm)
Steering flow	12.0 gpm (45.4 lpm)
Total flow	67.0 gpm (253.6 lpm) Optional: 82.0 gpm (310.4 lpm)

ATTENTION! Dear visitors, this site is not a trading platform, an official dealer or a spare parts supplier, so we do not have any price lists, spare parts catalogs, service or owner manuals. We are an information portal and provide the technical specifications.

We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.