International Harvester 784

International Harvester 784The International Harvester 784 is a 2WD/4WD utility tractor from the 84 series. This tractor was manufactured by the International Harvester in Doncaster, England from 1977 to 1984. The IH 784 is equipped with 4.0 L, four-cylinder diesel engine and synchromesh transmission (8 forward and 4 reverse gears) with dry disc clutch. The IH 784 was available in three versions: row-crop, low-profile, and utility tractor. The front axle and rear wheel were the primary difference between the three versions of the 784. All three versions had significant differences in the front and rear axles.

The International Harvester 784 utility tractor used 4.0 L, 4,031 cm2, (246 cu·in) four-cylinder diesel engine with 100.0 mm (3.94 in) of cylinder bore and 129.0 mm (5.08 in) of piston stroke. The compression ratio rating is 15.5:1. This engine produced 68.4 PS (50.3 kW; 67.5 HP) at 2,400 rpm of maximum output power.

The International Harvester 784 is equipped with hydraulic power steering, independent hydraulic wet disc brakes, open operator station with ROPS (standard), except on low-profile, canopy as an option, and 76 liters (20.1 US gal.; 16.7 Imp. gal) fuel tank. The cab was available as an option for the row-crop version.

International Harvester 784 Specifications

General Specifications
Model International Harvester 784
Length 3,600 mm (141.7 in)
Width 1,870 mm (73.6 in)
Height 1,600 mm (63 in)
Wheel base 2,230 mm (87.8 in)
Weight 2,700 kg (5,952 lbs)
Fuel tank capacity 76 liters (20.1 US gal.; 16.7 Imp. gal)
Battery 12V
Cabin type Open operator station with ROPS (standard)
Engine
Engine model International Harvester D246
Engine type Four-stroke, liquid-cooled, inline
Cylinders 4
Fuel type Diesel
Displacement 4 L, 4,031 cm2, (246 cu·in)
Bore and stroke 100.0 mm X 129.0 mm (3.94 in X 5.08 in)
Compression ratio 15.5:1
Horsepower 68.4 PS (50.3 kW; 67.5 HP) at 2,400 rpm
Starter Electric
Oil capacity: 8.3 L (8.77 US. qt, 7.3 Imp. qt.)
Coolant capacity: 13.6 L (14.37 US. qt, 11.97 Imp. qt.)
Transmission and chassis
Chassis 4×2 2WD or 4×4 MFWD 4WD
Steering type Hydraulic power
Brakes Independent hydraulic wet disc
Transmission model
Transmission type Synchromesh with dry disc clutch
Gears 8 forward and 4 reverse
Speed Forward: 25.6 kmh (15.9 mph) Reverse: 11.6 (7.2 mph)
Transmission oil capacity 34.1 L (36.03 US. qt, 30 Imp. qt.)
Tires
Front tires Ag: 7.50-16
Rear tires Ag: 16.9-30
Three-Point Hitch
Caterogy II
Control type Position and draft control
Lift capacity 1,630 kg (3,594 lbs)
PTO (Power take-off shaft)
Rear PTO type Independent
Rear PTO spped 540/1000 rpm
Hydraulic system
Hydraulic type Open center
Hydraulic capacity 34.1 L (36.03 US. qt, 30 Imp. qt.)
Valves 1 or 2
Pump flow 13 gpm (49.2 lpm)
ATTENTION! Dear visitors, this site is not a trading platform, an official dealer or a spare parts supplier, so we do not have any price lists, spare parts catalogs, service or owner manuals. We are an information portal and provide the technical specifications.

We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.

Be the first to comment

Leave a Reply

Your email address will not be published.


*