International Harvester 786

International Harvester 786The International Harvester 786 is a 2WD row-crop tractor from the 86 series. This tractor was manufactured by International Harvester in Rock Island, Illinois, USA and in Geelong, Australia from 1980 to 1981. The International 786 is equipped with a 5.9 L (358.0 cu·in) six-cylinder diesel engine and the Torque Amplifier transmission with 16 forward and 8 reverse gears.

The International 786 row-crop tractor used the International Harvester D358 engine. It is a 5.9 L, 5,867 cm2, (358.0 cu·in) six-cylinder natural aspirated diesel engine with 98.0 mm (3.86 in) of the cylinder bore and 129.0 mm (5.08 in) of the piston stroke. This engine produced 0 PS ( kW; 0 HP) at rpm of output power.

The IH 786 is equipped with power assist steering, hydraulic disc brakes, open operator station or cab (optional) and 189.3 liters (50 US gal.; 41.6 Imp. gal) fuel tank.

International Harvester 786 Specifications

General Specifications
Model International Harvester 786
Length 4,190 mm (165 in)
Width 2,590 mm (102 in)
Height ROPS: 2,840 mm (111.8 in)
Wheel base 2,560 mm (100.8 in)
Ground clearance 330 mm (13 in)
Weight (operating) 5,260 kg (11,600 lbs)
Fuel tank capacity 189.3 liters (50 US gal.; 41.6 Imp. gal)
Battery Two 12V, CCA 470A
Cabin type Open operator station or Cab (optional)
Engine
Engine model International Harvester D358
Engine type Four-stroke, liquid-cooled, inline
Cylinders 6
Fuel type Diesel
Displacement 5.9 L, 5,867 cm2, (358.0 cu·in)
Bore and stroke 98.0 mm X 129.0 mm (3.86 in X 5.08 in)
Horsepower
Starter Electric
Oil capacity: 11.4 L (12 US. qt, 10 Imp. qt.)
Coolant capacity: 22.7 L (24 US. qt, 20 Imp. qt.)
Transmission and chassis
Chassis 4×2 2WD
Steering type Power assist
Brakes Hydraulic disc
Transmission model Torque Amplifier
Transmission type
Gears 16 forward and 8 reverse
Speed Forward: 30.7 kmh (19.1 mph) Reverse: 15.1 (9.4 mph)
Transmission oil capacity 85.2 L (22.5 US. gal, 18.7 Imp. gal.)
Tires
Front tires Ag: 9.5L-15
Rear tires Ag: 18.4-34
Three-Point Hitch
Category II/I
Control type
Lift capacity (at ends)
PTO (Power take-off shaft)
Rear PTO type Independent
Rear PTO speed 540/1000 rpm
Hydraulic system
Hydraulic type Open center
Hydraulic capacity 85.2 L (22.5 US. gal, 18.7 Imp. gal.)