International Harvester 826

International Harvester 826The International Harvester 826 is a 2WD or 4WD utility tractor manufactured by International Harvester in Rock Island, Illinois, USA from 1969 to 1971.

The International Harvester 826 is equipped with one of two engines: a 5.9 L (358.0 cu·in) six-cylinder diesel engine or a 4.9 L (301.0 cu·in) six-cylinder gasoline engine and one of two transmissions: a two-speed power shift transmission with 16 forward and 8 reverse gears or a hydrostatic transmission with infinite forward and reverse gears.

The tractor could be equipped with the following engines:

  • International Harvester D-358. It is a 5.9 L, 5,866 cm2, (358.0 cu·in) six-cylinder natural aspirated diesel engine with 98.0 mm (3.86 in) of the cylinder bore and 129.0 mm (5.08 in) of the piston stroke. The compression ratio rating is 16.0:1.
  • International Harvester C-301. It is a 4.9 L, 4,932 cm2, (301.0 cu·in) six-cylinder natural aspirated gasoline engine. The cylinder bore is 97.0 mm (3.82 in) and the piston stroke is 112.0 mm (4.41 in).

The IH 826 is equipped with power steering, hydraulic dry disc brakes, open operator station or cab, and 140.0 liters (37 US gal.; 30.8 Imp. gal) fuel tank.

International Harvester 826 Specifications

General Specifications
Model International Harvester 826
Length
Width
Height
Wheel base 2,660 mm (104.7 in)
Ground clearance
Weight (ballasted) 6,270 kg (13,823 lbs)
Fuel tank capacity 140.0 liters (37 US gal.; 30.8 Imp. gal)
Battery 12V
Cabin type Open operator station or Cab
Engine
Engine model International Harvester D-358
Engine type Four-stroke, liquid-cooled, inline
Cylinders 6
Fuel type Diesel
Displacement 5.9 L, 5,866 cm2, (358.0 cu·in)
Bore and stroke 98.0 mm X 129.0 mm (3.86 in X 5.08 in)
Compression ratio 16.0:1
Horsepower
Starter Electric
Engine
Engine model International Harvester C-301
Engine type Four-stroke, liquid-cooled, inline
Cylinders 6
Fuel type Gasoline
Displacement 4.9 L, 4,932 cm2, (301.0 cu·in)
Bore and stroke 97.0 mm X 112.0 mm (3.82 in X 4.41 in)
Horsepower
Starter Electric
Transmission and chassis
Chassis 4×2 2WD or 4×4 MFWD 4WD
Steering type Power
Brakes Hydraulic dry disc
Transmission model Torque Amplifier
Transmission type Two-speed power shift
Gears 16 forward and 8 reverse
Transmission model
Transmission type Hydrostatic
Gears Infinite forward and reverse
Speed Forward: 29.4 kmh (18.3 mph) Reverse: 15.3 (9.5 mph)
Tires
Front tires Ag: 9.5L-15
Rear tires Ag: 18.4-34
Three-Point Hitch
Category II
Control type
Lift capacity (at ends)
PTO (Power take-off shaft)
Rear PTO type Independent
Rear PTO speed 540/1,000 rpm
Hydraulic system
Hydraulic type Open center