International Harvester 886

International Harvester 886The International Harvester 886 is a 2WD or 4WD row-crop tractor from the 86 series. This tractor was manufactured by International Harvester in Rock Island, Illinois, USA from 1976 to 1981.

The International Harvester 886 is equipped with one of two engines: a 5.9 L (360.0 cu·in) six-cylinder diesel engine or a 5.9 L (358.0 cu·in) six-cylinder diesel engine and a partial power shift transmission with 16 forward and 8 reverse gears.

The tractor could be equipped with the following engines:

  • International Harvester D-360 (before 1979). It is a 5.9 L, 5,899 cm2, (360.0 cu·in) six-cylinder natural aspirated diesel engine with 98.0 mm (3.86 in) of the cylinder bore and 129.0 mm (5.08 in) of the piston stroke.
  • International Harvester D-358 (after 1979). It is a 5.9 L, 5,866 cm2, (358.0 cu·in) six-cylinder natural aspirated diesel engine. The cylinder bore is 98.0 mm (3.86 in) and the piston stroke is 129.0 mm (5.08 in). The compression ratio rating is 14.8:1.

The IH 886 is equipped with power assist steering, hydraulic wet disc brakes, open operator station or cab (optional) and 189.3 liters (50 US gal.; 41.6 Imp. gal) fuel tank.

International Harvester 886 Specifications

General Specifications
Model International Harvester 886
Length 2WD: 4,190 mm (165 in)
4WD: 4,140 mm (163 in)
Width 2,590 mm (102 in)
Height Cab: 2,840 mm (111.8 in)
Wheel base Wide-tread: 2,660 mm (104.7 in)
Tricycle f: 2,560 mm (100.8 in)
Ground clearance 330 mm (13 in)
Weight (shipping) 4,990 kg (11,001 lbs)
Fuel tank capacity 189.3 liters (50 US gal.; 41.6 Imp. gal)
Battery Two 12v, CCA 470A
Cabin type Open operator station or Cab (optional)
Engine
Engine model International Harvester D-360
Engine type Four-stroke, liquid-cooled, inline
Cylinders 6
Fuel type Diesel
Displacement 5.9 L, 5,899 cm2, (360.0 cu·in)
Bore and stroke 98.0 mm X 129.0 mm (3.86 in X 5.08 in)
Horsepower
Starter Electric
Oil capacity: 11.4 L (12 US. qt, 10 Imp. qt.)
Coolant capacity: 22.7 L (24 US. qt, 20 Imp. qt.)
Engine
Engine model International Harvester D-358
Engine type Four-stroke, liquid-cooled, inline
Cylinders 6
Fuel type Diesel
Displacement 5.9 L, 5,866 cm2, (358.0 cu·in)
Bore and stroke 98.0 mm X 129.0 mm (3.86 in X 5.08 in)
Compression ratio 14.8:1
Horsepower
Starter Electric
Oil capacity: 11.4 L (12 US. qt, 10 Imp. qt.)
Coolant capacity: 22.7 L (24 US. qt, 20 Imp. qt.)
Transmission and chassis
Chassis 4×2 2WD or 4×4 MFWD 4WD
Steering type Power assist
Brakes Hydraulic wet disc
Transmission model Torque Amplifier
Transmission type Partial power shift
Gears 16 forward and 8 reverse
Speed Forward: 30.7 kmh (19.1 mph) Reverse: 15.1 (9.4 mph)
Transmission oil capacity 85.2 L (22.5 US. gal, 18.7 Imp. gal.)
Tires
Front tires Ag: 10.00-16
Rear tires Ag: 18.4-38
Three-Point Hitch
Category II
Control type
Lift capacity (at ends)
PTO (Power take-off shaft)
Rear PTO type Independent
Rear PTO speed 540/1,000 rpm
Hydraulic system
Hydraulic type Open center
Hydraulic capacity 85.2 L (22.5 US. gal, 18.7 Imp. gal.)
ATTENTION! Dear visitors, this site is not a trading platform, an official dealer or a spare parts supplier, so we do not have any price lists, spare parts catalogs, service or owner manuals. We are an information portal and provide the technical specifications.

We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.

Be the first to comment

Leave a Reply

Your email address will not be published.


*