Massey Ferguson 1035

Massey Ferguson 1035The Massey Ferguson 1035 is a 2WD or 4WD compact utility tractor manufactured by Toyosha for distributor Massey Ferguson from 1986 to 1991. The Massey Ferguson 1035 is equipped with a 1.5 L (91.8 cu·in) three-cylinder diesel engine and a gear type transmission with 12 forward and 4 reverse gears and dry disc clutch.

The MF 1035 compact utility tractor used the Toyosha engine. It is a 1.5 L, 1,504 cm2, (91.8 cu·in) three-cylinder natural aspirated diesel engine. This engine produced 31.4 PS (23.1 kW; 31 HP) at 2,600 rpm of output power.

The Massey Ferguson 1035 is equipped with power steering, two-post ROPS, and 27.0 liters (7.1 US gal.; 5.9 Imp. gal) fuel tank.

Following attachments are available for the MF 1035 compact utility tractor:

  • Mid-mount Massey Ferguson 1019: 1,820 mm (72 in) mower deck
  • Mid-mount Massey Ferguson 1026: 1,820 mm (72 in) mower deck
  • Massey Ferguson 1016 loader
  • Massey Ferguson 1017 backhoe

Massey Ferguson 1035 Specifications

General Specifications
Model Massey Ferguson 1035
Length 2,960 mm (116.5 in)
Width 1,500 mm (59.1 in)
Height 1,540 mm (60.6 in)
Wheel base 1,700 mm (66.9 in)
Weight (shipping) 2WD: 1,230 kg (2,715 lbs)
4WD: 1,330 kg (2,935 lbs)
Fuel tank capacity 27.0 liters (7.1 US gal.; 5.9 Imp. gal)
Battery 12V
Cabin type Two-post ROPS
Engine model Toyosha
Engine type Four-stroke, liquid-cooled, inline
Cylinders 3
Fuel type Diesel
Displacement 1.5 L, 1,504 cm2, (91.8 cu·in)
Bore and stroke
Horsepower 31.4 PS (23.1 kW; 31 HP) at 2,600 rpm
Starter Electric
Oil capacity: 3.5 L (3.7 US. qt, 3.1 Imp. qt.)
Coolant capacity: 4.0 L (4.2 US. qt, 3.5 Imp. qt.)
Transmission and chassis
Chassis 4×2 2WD or 4×4 MFWD 4WD
Steering type Power
Transmission model
Transmission type Gear type with dry disc clutch
Gears 12 forward and 4 reverse
Transmission oil capacity 28.0 L (7.4 US. gal, 6.2 Imp. gal.)
Front tires Ag: 5.00-15 (2WD), 7.00-16 (4WD)
Rear tires Ag: 13.6-24
Three-Point Hitch
Caterogy I
Control type
Lift capacity (at ends) 1,010 kg (2,225 lbs)
PTO (Power take-off shaft)
Rear PTO type Live
Rear PTO speed 540 rpm
Hydraulic system
Hydraulic type Open center
Pump flow 6.0 gpm (22.7 lpm)
ATTENTION! Dear visitors, this site is not a trading platform, an official dealer or a spare parts supplier, so we do not have any price lists, spare parts catalogs, service or owner manuals. We are an information portal and provide the technical specifications.

We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.

1 Comment

Leave a Reply

Your email address will not be published.