Massey Ferguson 290 Xtra

Massey Ferguson 290 XtraThe Massey Ferguson 290 Xtra is a two-wheel or four-wheel tractor, manufactured under Massey Ferguson brand. The Massey Ferguson 290 Xtra tractor is equipped with Simpson S440 (4.0 L, 244 cu.in.) diesel engine and two transmission options: Sliding Spur transmission with 8 forward and 2 reverse or Synchromesh transmission with 12 forward and 4 reverse.

The 290 Xtra tractor used a four-cylinder naturally-aspirated liquid-cooled direct injection diesel engine Simpson S440, with 100 mm (3.94 in) of the cylinder bore and 127 mm (5 in) of the piston stroke. The Simpson S440 engine produced 83 PS (61 kW; 81.8 HP) at 2,200 rpm of output power and 291 Nm (29.7 kg·m; 214.8 ft·lb) at 1,400 rpm of torque. The engine used an oil-bath with a pre-cleaner air cleaner

The Massey Ferguson 290 Xtra used hydrostatic power-assisted steering, mechanical differential, and oil immersed mechanical actuated brakes. The Massey Ferguson 290 Xtra used open operator station.

Massey Ferguson 290 Xtra specifications

General Specifications
ModelMassey Ferguson 290 Xtra
Length3,890 mm (153.1 in.)
Width
Height2,520 mm (99.2 in.)
Wheelbase2,290 mm (90.2 in.)
Ground clearance
Weight (operating) 2WD 2,880 kg (6349 lb.)
4WD 3,010 kg (6636 lb.)
Fuel tank capacity70 l (18.5 Gal.)
Battery12V
Engine
Engine modelSimpson S440
Number of Cylinders4
Firing order
FuelDiesel
Displacement4.0 L, (244 cu.in.)
Bore x stroke100 x 127 mm (3.94 x 5.0 in)
Power output83 PS (61 kW; 81.8 HP) at 2,200 rpm
Torque291 Nm (29.7 kg·m; 214.8 ft·lb) at 1,400 rpm
Starter typeElectric starter
Oil type
Tires size
Front tires 2WD7.50-16
4WD12.4-24
Rear tires 18.4-30
Transmission and chassis
Chassis4×2 2WD or 4×4 4WD
SteeringHydrostatic
Sliding Spur transmission
Transmission typeSliding gear
Gears8 forward and 2 reverse
Sinchromesh transmission
Transmission typeSinchromesh
Gears12 forward and 4 reverse
PTO (Power take-off shaft)
PTO Type: Rear, live type
PTO Speed:540 rpm
Hydraulic lift
3-point linkage:Category II
Control system:
No. of remote valves:
Max lifting capacity (at link end):2,050 kg (4519 lb.)
Hydraulic system
TypeFerguson system
Max oil flow18.0 lpm
Pressure176 bar
ATTENTION! Dear visitors, this site is not a trading platform, an official dealer or a spare parts supplier, so we do not have any price lists, spare parts catalogs, service or owner manuals. We are an information portal and provide the technical specifications.

We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.

Be the first to comment

Leave a Reply

Your email address will not be published.


*