Massey Ferguson 1240

Massey Ferguson 1240The Massey Ferguson 1240 is a 2WD (1240-2) or 4WD compact utility tractor from the 1200 Compact series. This tractor was manufactured by Iseki for distributor Massey Ferguson from 1992 to 2002. The Massey Ferguson 1240 is equipped with a 1.5 L (89.3 cu·in) three-cylinder diesel engine and a synchro shuttle transmission with 16 forward and reverse gears and dry disc clutch.

The MF 1240 compact utility tractor used the Iseki engine. It is a 1.5 L, 1,463 cm2, (89.3 cu·in) three-cylinder natural aspirated diesel engine. The compression ratio rating is 21.5:1. This engine produced 30.5 PS (22.4 kW; 30.0 HP) at 2,500 rpm of output power and 93.6 N·m (9.5 kg·m, 69 ft·lb) at 1,500 rpm of torque.

The Massey Ferguson 1240 is equipped with power assist steering, wet disc brakes, two-post foldable ROPS, and 30.0 liters (7.9 US gal.; 6.6 Imp. gal) fuel tank.

Following attachments are available for the MF 1240 compact utility tractor:

  • Mid-mount Massey Ferguson: 1,520 mm (60 in) mower deck
  • Mid-mount Massey Ferguson: 1,820 mm (72 in) mower deck
  • Front-mount Massey Ferguson 1405: 1,670 mm (66 in) blade with hydraulic lift
  • Front-mount Massey Ferguson 1410: 1,600 mm (63 in) two-stage snow blower with hydraulic lift

Massey Ferguson 1240 Specifications

General Specifications
Model Massey Ferguson 1240
Length 3,010 mm (118.5 in)
Width 1,390 mm (54.7 in)
Height (ROPS) 2,130 mm (83.9 in)
Wheel base 1,640 mm (64.6 in)
Ground clearance 290 mm (11.4 in)
Weight (shipping) 2WD: 1,150 kg (2,535 lbs)
4WD: 1,200 kg (2,646 lbs)
Fuel tank capacity 30.0 liters (7.9 US gal.; 6.6 Imp. gal)
Battery 12V
Cabin type Two-post foldable ROPS
Engine
Engine model Iseki
Engine type Four-stroke, liquid-cooled, inline
Cylinders 3
Fuel type Diesel
Displacement 1.5 L, 1,463 cm2, (89.3 cu·in)
Bore and stroke
Compression ratio 21.5:1
Horsepower 30.5 PS (22.4 kW; 30.0 HP) at 2,500 rpm
Torque 93.6 N·m (9.5 kg·m, 69 ft·lb) at 1,500 rpm
Starter Electric
Coolant capacity: 6.5 L (6.9 US. qt, 5.7 Imp. qt.)
Transmission and chassis
Chassis 4×2 2WD or 4×4 MFWD 4WD
Steering type Power assist
Brakes Wet disc
Transmission model
Transmission type Synchro shuttle with dry disc clutch
Gears 16 forward and reverse
Speed Forward: 23.8 kmh (14.8 mph) Reverse: (0 mph)
Tires
Front tires Ag: 5.00-15
Rear tires Ag: 11.2-24
Three-Point Hitch
Caterogy I
Control type Position control
Lift capacity (at ends) 1,300 kg (2,865 lbs)
PTO (Power take-off shaft)
Middle PTO type Independent with electro-hydraulic clutch (optional)
Middle PTO speed 1,885 rpm
Rear PTO type Independent with electro-hydraulic clutch
Rear PTO speed 540 rpm
Hydraulic system
Hydraulic type Open center
Hydraulic capacity 23.1 L (6.1 US. gal, 5.1 Imp. gal.)
Pump flow 6.0 gpm (22.7 lpm)
Steering flow 3.2 gpm (12.1 lpm)
Total flow 9.2 gpm (34.8 lpm)
ATTENTION! Dear visitors, this site is not a trading platform, an official dealer or a spare parts supplier, so we do not have any price lists, spare parts catalogs, service or owner manuals. We are an information portal and provide the technical specifications.

We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.

Be the first to comment

Leave a Reply

Your email address will not be published.


*