The Massey Ferguson 1526 is a 4WD compact utility tractor from the 1500 series. This tractor was manufactured by Massey Ferguson since 2011. The Massey Ferguson 1526 is equipped with a 1.5 L (91.4 cu·in) three-cylinder diesel engine and a hydrostatic transmission with infinite (3-range) forward and reverse gears.
The MF 1526 compact utility tractor used the Iseki E3CF-VB22 engine. It is a 1.5 L, 1,498 cm2, (91.4 cu·in) three-cylinder natural aspirated diesel engine with 87.0 mm (3.43 in) of the cylinder bore and 84.0 mm (3.31 in) of the piston stroke. This engine produced 25.2 PS (18.5 kW; 24.8 HP) at 2,600 rpm of output power.
The Massey Ferguson 1526 is equipped with power steering, wet disc brakes, two-post foldable ROPS, and 27.0 liters (7.1 US gal.; 5.9 Imp. gal) fuel tank.
Following attachments are available for the Massey Ferguson 1526 compact utility tractor:
- Mid-mount Massey Ferguson 60 in (1,520 mm) mower deck
- Massey Ferguson L100E loader
Massey Ferguson 1526 Specifications
General Specifications | |
Model | Massey Ferguson 1526 |
Length | 2,810 mm (110.6 in) |
Width | 1,240 mm (48.8 in) |
Height | ROPS: 2,420 mm (95.3 in) |
Wheel base | 1,550 mm (61 in) |
Ground clearance | 270 mm (10.6 in) |
Weight (shipping) | 850 kg (1,874 lbs) |
Fuel tank capacity | 27.0 liters (7.1 US gal.; 5.9 Imp. gal) |
Battery | 12V |
Cabin type | Two-post foldable ROPS |
Engine | |
Engine model | Iseki E3CF-VB22 |
Engine type | Four-stroke, liquid-cooled, inline |
Cylinders | 3 |
Fuel type | Diesel |
Displacement | 1.5 L, 1,498 cm2, (91.4 cu·in) |
Bore and stroke | 87.0 mm X 84.0 mm (3.43 in X 3.31 in) |
Horsepower | 25.2 PS (18.5 kW; 24.8 HP) at 2,600 rpm |
Starter | Electric |
Transmission and chassis | |
Chassis | 4×4 MFWD 4WD |
Steering type | Power |
Brakes | Wet disc |
Differential lock | Mechanical rear |
Transmission model | – |
Transmission type | Hydrostatic |
Gears | Infinite (3-range) forward and reverse |
Tires | |
Front tires | Ag: 7-12 Lawn/turf: 25×8.50-14 |
Rear tires | Ag: 35×12.00-16.5 Lawn/turf: 36×13.50-15 |
Three-Point Hitch | |
Category | I |
Control type | Position control |
Lift capacity (at ends) | 600 kg (1,323 lbs) |
PTO (Power take-off shaft) | |
Middle PTO type | Independent |
Middle PTO speed | 2,000 rpm |
Rear PTO type | Independent with electro-hydraulic clutch |
Rear PTO speed | 540 rpm |
Hydraulic system | |
Hydraulic type | Open center |
SCV flow | 5.5 gpm (20.8 lpm) |
Steering flow | 3.2 gpm (12.1 lpm) |
Total flow | 8.7 gpm (32.9 lpm) |