The Massey Ferguson 202 Work Bull is a 2WD industrial tractor from the Work Bull series. This tractor was manufactured by Massey Ferguson in from 1958 to 1967. The MF 202 is equipped with a 2.2 L (134.0 cu·in) four-cylinder gasoline engine and one of two transmissions: a gear type transmission with 6 forward and 2 reverse gears and dry disc clutch or a mechanical shuttle transmission with 6 forward and 6 reverse gears and with dry disc clutch.
The Massey Ferguson 202 Work Bull industrial tractor used the Continental Z-134 engine. It is a 2.2 L, 2,196 cm2, (134.0 cu·in) four-cylinder natural aspirated gasoline engine with 84.0 mm (3.31 in) of the cylinder bore and 98.0 mm (3.86 in) of the piston stroke. The compression ratio rating is 6.6:1. This engine produced 40.5 PS (29.8 kW; 40.0 HP) at 2,000 rpm of net horsepower and 146.4 N·m (14.9 kg·m, 107.9 ft·lb) at 1,200 rpm of torque.
The MF 202 Work Bull is equipped with power steering, mechanical drum brakes, and open operator station.
Massey Ferguson 202 Work Bull Specifications
| General Specifications | |
| Model | Massey Ferguson 202 Work Bull |
| Length | 2,990 mm (117.7 in) |
| Width | 1,670 mm (65.7 in) |
| Height | 1,350 mm (53.1 in) |
| Wheel base | – |
| Ground clearance | 330 mm (13 in) |
| Weight | 1,390 kg (3,064 lbs) |
| Fuel tank capacity | – |
| Battery | – |
| Cabin type | Open operator station |
| Engine | |
| Engine model | Continental Z-134 |
| Engine type | Four-stroke, liquid-cooled, inline |
| Cylinders | 4 |
| Fuel type | Gasoline |
| Displacement | 2.2 L, 2,196 cm2, (134.0 cu·in) |
| Bore and stroke | 84.0 mm X 98.0 mm (3.31 in X 3.86 in) |
| Compression ratio | 6.6:1 |
| Horsepower | 40.5 PS (29.8 kW; 40.0 HP) at 2,000 rpm |
| Torque | 146.4 N·m (14.9 kg·m, 107.9 ft·lb) at 1,200 rpm |
| Starter | Electric |
| Transmission and chassis | |
| Chassis | 4×2 2WD |
| Steering type | Power |
| Brakes | Mechanical drum |
| Transmission model | – |
| Transmission type | Gear type with dry disc clutch |
| Gears | 6 forward and 2 reverse |
| Speed | Forward: 21.2 kmh (13.2 mph) Reverse: 12.6 (7.8 mph) |
| Transmission model | – |
| Transmission type | Mechanical shuttle with dry disc clutch |
| Gears | 6 forward and 6 reverse |
| Speed | Forward: 31.9 kmh (19.8 mph) Reverse: 28.9 (18 mph) |
| Tires | |
| Front tires | Ag: 7.50-16 |
| Rear tires | Ag: 14.9-25, 13-24 |
| Three-Point Hitch | |
| Caterogy | I (optional) |
| Control type | – |
| Lift capacity (at ends) | – |
| PTO (Power take-off shaft) | |
| Rear PTO type | Transmission or live |
| Rear PTO speed | 540 rpm |
| Hydraulic system | |
| Hydraulic type | Open center |
| Pressure | 2800 psi (193.1 bar) |
| Pump flow | 4.0 gpm (15.1 lpm) |
| Steering flow | 4.0 gpm (15.1 lpm) |
| Total flow | 8.0 gpm (30.3 lpm) |
Be the first to comment