The Massey Ferguson 261 is a 2WD utility tractor from the 200 series. This tractor was manufactured by Ursus for distributor Massey Ferguson in Poland from 1992 to 1997. The Massey Ferguson 261 is equipped with a 3.9 L (236.0 cu·in) four-cylinder diesel engine and a sliding gear transmission with 8 forward and 2 reverse gears.
The Massey Ferguson 261 utility tractor used the Perkins AD4.236 engine. It is a 3.9 L, 3,867 cm2, (236.0 cu·in) four-cylinder natural aspirated diesel engine with 98.0 mm (3.86 in) of the cylinder bore and 127.0 mm (5 in) of the piston stroke. This engine produced 60.8 PS (44.7 kW; 60.0 HP) at 2,000 rpm of output power.
The MF 261 is equipped with hydrostatic power steering, wet disc brakes, two-post ROPS, and 79.5 liters (21 US gal.; 17.5 Imp. gal) fuel tank.
Massey Ferguson 261 Specifications
|Model||Massey Ferguson 261|
|Length||3,750 mm (147.6 in)|
|Width||1,920 mm (75.6 in)|
|Height (ROPS)||2,450 mm (96.5 in)|
|Wheel base||2,220 mm (87.4 in)|
|Ground clearance||340 mm (13.4 in)|
|Fuel tank capacity||79.5 liters (21 US gal.; 17.5 Imp. gal)|
|Cabin type||Two-post ROPS|
|Engine model||Perkins AD4.236|
|Engine type||Four-stroke, liquid-cooled, inline|
|Displacement||3.9 L, 3,867 cm2, (236.0 cu·in)|
|Bore and stroke||98.0 mm X 127.0 mm (3.86 in X 5 in)|
|Horsepower||60.8 PS (44.7 kW; 60.0 HP) at 2,000 rpm|
|Coolant capacity:||14.0 L (14.8 US. qt, 12.3 Imp. qt.)|
|Transmission and chassis|
|Steering type||Hydrostatic power|
|Transmission type||Sliding gear|
|Gears||8 forward and 2 reverse|
|Front tires||Ag: 7.50-16|
|Rear tires||Ag: 16.9-30|
|Control type||Position and draft control|
|Lift capacity (at ends)||–|
|PTO (Power take-off shaft)|
|Rear PTO type||Live with two stage clutch|
|Rear PTO speed||540 rpm|
|Hydraulic type||Open center|
|Hydraulic capacity||41.6 L (11 US. gal, 9.2 Imp. gal.)|
We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.
Be the first to comment