Massey Ferguson 375 (1988-1997)

Massey Ferguson 375The Massey Ferguson 375 is a 2WD or 4WD utility tractor from the 300 series. This tractor was manufactured by Massey Ferguson in Coventry, England from 1987 to 1997. This second version was manufactured from 1988 to 1997. The MF 375 is equipped with a 3.9 L (236.0 cu·in) four-cylinder diesel engine and one of two transmissions: a synchromesh transmission with 12 forward and 4 reverse gears or a two-speed power shift transmission with 12 forward and 4 reverse gears.

The MF 375 utility tractor used the Perkins A4.236 engine. It is a 3.9 L, 3,867 cm2, (236.0 cu·in) four-cylinder natural aspirated diesel engine with 98.0 mm (3.86 in) of the cylinder bore and 127.0 mm (5 in) of the piston stroke. This engine produced 73 PS (53.7 kW; 72.0 HP) at 2,200 rpm of output power.

The Massey Ferguson 375 is equipped with hydrostatic power steering, differential wet disc brakes, two-post ROPS, and 107.9 liters (28.5 US gal.; 23.7 Imp. gal) fuel tank.

Following attachments are available for the Massey Ferguson 375 utility tractor:

  • Massey Ferguson 236 loader
  • Massey Ferguson 838 loader (only for 4WD version)

Massey Ferguson 375 Specifications

General Specifications
Model Massey Ferguson 375
Length 2WD: 3,660 mm (144.1 in)
4WD: 3,880 mm (152.8 in)
Width 2WD: 1,970 mm (77.6 in)
4WD: 1,920 mm (75.6 in)
Height 2WD: 2,380 mm (93.7 in)
4WD: 2,430 mm (95.7 in)
Wheel base 2WD: 2,130 mm (83.9 in)
4WD: 2,340 mm (92.1 in)
Ground clearance 2WD: 250 mm (9.8 in)
4WD: 310 mm (12.2 in)
Weight 2WD: 2,740 kg (6,041 lbs)
4WD: 3,265 kg (7,198 lbs)
Fuel tank capacity 107.9 liters (28.5 US gal.; 23.7 Imp. gal)
Battery 12V
Cabin type Two-post ROPS
Engine
Engine model Perkins A4.236
Engine type Four-stroke, liquid-cooled, inline
Cylinders 4
Fuel type Diesel
Displacement 3.9 L, 3,867 cm2, (236.0 cu·in)
Bore and stroke 98.0 mm X 127.0 mm (3.86 in X 5 in)
Horsepower 73 PS (53.7 kW; 72.0 HP) at 2,200 rpm
Starter Electric
Coolant capacity: 15.1 L (16 US. qt, 13.3 Imp. qt.)
Transmission and chassis
Chassis 4×2 2WD or 4×4 MFWD 4WD
Steering type Hydrostatic power
Brakes Differential wet disc
Transmission model
Transmission type Synchromesh
Gears 12 forward and 4 reverse
Transmission model Multi-Power
Transmission type Two-speed power shift
Gears 12 forward and 4 reverse
Tires
Front tires Ag: 7.50-16
Rear tires Ag: 16.9-30
Three-Point Hitch
Category II
Control type
Lift capacity (at ends) 1,925 kg (4,245 lbs)
PTO (Power take-off shaft)
Rear PTO type Live or independent
Rear PTO speed 540, 540/1000 rpm
Hydraulic system
Hydraulic type Open center
Hydraulic capacity 43.5 L (11.5 US. gal, 9.6 Imp. gal.)
Pressure 3000 psi (206.8 bar)
Valves 2
Pump flow 9.5 gpm (36 lpm)
3-point: 4.4 gpm (16.7 lpm)
Total flow 13.9 gpm (52.6 lpm)