Massey Ferguson 383

Massey Ferguson 383The Massey Ferguson 383 is a 2WD utility tractor from the 300 series. This tractor was manufactured by Massey Ferguson in Coventry, England from 1987 to 1997. The Massey Ferguson 383 is equipped with a 4.1 L (248.0 cu·in) four-cylinder diesel engine and a gear type transmission with 8 forward and 2 reverse gears.

The MF 383 utility tractor used the Perkins A2.248 engine. It is a 4.1 L, 4,064 cm2, (248.0 cu·in) four-cylinder natural aspirated diesel engine with 101.0 mm (3.98 in) of the cylinder bore and 127.0 mm (5 in) of the piston stroke. This engine produced 82.1 PS (60.4 kW; 81.0 HP) at 2,200 rpm of output power.

The Massey Ferguson 383 is equipped with power steering, wet disc brakes, two-post ROPS, and 107.9 liters (28.5 US gal.; 23.7 Imp. gal) fuel tank.

Massey Ferguson 383 Specifications

General Specifications
ModelMassey Ferguson 383
Length3,660 mm (144.1 in)
Width2,000 mm (78.7 in)
Wheel base2,130 mm (83.9 in)
Ground clearance350 mm (13.8 in)
Weight2,766 kg (6,098 lbs)
Fuel tank capacity107.9 liters (28.5 US gal.; 23.7 Imp. gal)
Cabin typeTwo-post ROPS
Engine modelPerkins A2.248
Engine typeFour-stroke, liquid-cooled, inline
Fuel typeDiesel
Displacement4.1 L, 4,064 cm2, (248.0 cu·in)
Bore and stroke101.0 mm X 127.0 mm (3.98 in X 5 in)
Horsepower82.1 PS (60.4 kW; 81.0 HP) at 2,200 rpm
Coolant capacity:15.1 L (16 US. qt, 13.3 Imp. qt.)
Transmission and chassis
Chassis4×2 2WD
Steering typePower
BrakesDifferental wet disc
Transmission model
Transmission typeGear type
Gears8 forward and 2 reverse
Front tires Ag: 8.5L-15
Rear tires Ag: 18.4-30
Three-Point Hitch
Control type
Lift capacity (at ends)1,930 kg (4,256 lbs)
PTO (Power take-off shaft)
Rear PTO typeLive
Rear PTO speed540 rpm
Hydraulic system
Hydraulic typeOpen center
Pressure3000 psi (206.8 bar)
Pump flow4.4 gpm (16.7 lpm)
ATTENTION! Dear visitors, this site is not a trading platform, an official dealer or a spare parts supplier, so we do not have any price lists, spare parts catalogs, service or owner manuals. We are an information portal and provide the technical specifications.

We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.

Be the first to comment

Leave a Reply

Your email address will not be published.