Massey Ferguson 390T

Massey Ferguson 390TThe Massey Ferguson 390T is a 2WD or 4WD utility tractor from the 300 series. This tractor was manufactured by Massey Ferguson in Coventry, England from 1989 to 1997. The Massey Ferguson 390T is equipped with a 3.9 L (236.0 cu·in) four-cylinder diesel engine and one of two transmissions: a transmission with 12 forward and 4 reverse gears or a transmission with 12 forward and 12 reverse gears.

The Massey Ferguson 390T utility tractor used the Perkins engine. It is a 3.9 L, 3,867 cm2, (236.0 cu·in) four-cylinder turbocharged diesel engine with 99.0 mm (3.9 in) of the cylinder bore and 127.0 mm (5 in) of the piston stroke. This engine produced 96.3 PS (70.8 kW; 95.0 HP) at 2,200 rpm of output power.

Following attachments are available for the Massey Ferguson 390T utility tractor:

  • Massey Ferguson 236 loader
  • Massey Ferguson 838 loader

Massey Ferguson 390T Specifications

General Specifications
Model Massey Ferguson 390T
Length 3,750 mm (147.6 in)
Width
Height 2,570 mm (101.2 in)
Wheel base 2,130 mm (83.9 in)
Weight 2,900 kg (6,393 lbs)
Fuel tank capacity 108.0 liters (28.5 US gal.; 23.8 Imp. gal)
Battery
Cabin type Two post ROPS
Engine
Engine model Perkins
Engine type Four-stroke, liquid-cooled, inline
Cylinders 4
Fuel type Diesel
Displacement 3.9 L, 3,867 cm2, (236.0 cu·in)
Bore and stroke 99.0 mm X 127.0 mm (3.9 in X 5 in)
Horsepower 96.3 PS (70.8 kW; 95.0 HP) at 2,200 rpm
Starter Electric
Coolant capacity: 15.1 L (16 US. qt, 13.3 Imp. qt.)
Transmission and chassis
Chassis 4×2 2WD or 4×4 MFWD 4WD
Steering type
Brakes
Transmission model
Transmission type
Gears 12 forward and 4 reverse
Transmission model
Transmission type
Gears 12 forward and 12 reverse
Tires
Front tires Ag: 7.50-16
Rear tires Ag: 18.4-30
Three-Point Hitch
Caterogy II
Control type
Lift capacity (at ends) 3,060 kg (6,745 lbs)
PTO (Power take-off shaft)
Rear PTO type Independent
Rear PTO speed 540, 1,000 rpm
Hydraulic system
Hydraulic type Open center
Hydraulic capacity 47.3 L (12.5 US gal, 10.4 Imp. gal)
Valves 2
Pump flow 16.7 gpm (63.2 lpm)
ATTENTION! Dear visitors, this site is not a trading platform, an official dealer or a spare parts supplier, so we do not have any price lists, spare parts catalogs, service or owner manuals. We are an information portal and provide the technical specifications.

We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.

Be the first to comment

Leave a Reply

Your email address will not be published.


*