Massey Ferguson 431

Massey Ferguson 431The Massey Ferguson 431 is a 2WD utility tractor from the 400 series. This tractor was manufactured by Massey Ferguson in Turkey from 2004 to 2006. The Massey Ferguson 431 is equipped with a 3.3 L (201.0 cu·in) three-cylinder diesel engine and a gear type transmission with 8 forward and 2 reverse gears and dry disc clutch .

The MF 431 utility tractor used the Perkins 1103C-33 engine. It is a 3.3 L, 3,294 cm2, (201.0 cu·in) three-cylinder natural aspirated diesel engine with 105.0 mm (4.13 in) of the cylinder bore and 127.0 mm (5 in) of the piston stroke. This engine produced 52.8 PS (38.8 kW; 52.0 HP) of gross output power.

The Massey Ferguson 431 is equipped with power steering, dry drum brakes, a flat-deck platform with two-post folding ROPS, and 48.1 liters (12.7 US gal.; 10.6 Imp. gal) fuel tank. This tractor could be equipped with the Massey Ferguson 1040 loader.

Massey Ferguson 431 Specifications

General Specifications
Model Massey Ferguson 431
Length 3,250 mm (128.0 in)
Width 1,660 mm (65.4 in)
Height 2,340 mm (92.1 in)
Wheel base 1,930 mm (76 in)
Weight (shipping) 1,960 kg (4,321 lbs)
Fuel tank capacity 48.1 liters (12.7 US gal.; 10.6 Imp. gal)
Battery 12V
Cabin type Flat-deck platform with two-post folding ROPS
Engine
Engine model Perkins 1103C-33
Engine type Four-stroke, liquid-cooled, inline
Cylinders 3
Fuel type Diesel
Displacement 3.3 L, 3,294 cm2, (201.0 cu·in)
Bore and stroke 105.0 mm X 127.0 mm (4.13 in X 5 in)
Horsepower 52.8 PS (38.8 kW; 52.0 HP)
Starter Electric
Transmission and chassis
Chassis 4×2 2WD
Steering type Power
Brakes Dry drum
Final drive Direct
Transmission model
Transmission type Gear type with dry disc clutch
Gears 8 forward and 2 reverse
Tires
Front tires Ag: –
Rear tires Ag: –
Three-Point Hitch
Category II/I
Control type Position control and top-link draft sensing
Lift capacity (at ends) 925 kg (2,040 lbs)
PTO (Power take-off shaft)
Rear PTO type Live with dry disc clutch
Rear PTO speed 540 rpm
Hydraulic system
Hydraulic type Open center
Valves 2
Pump flow 3-point: 4.4 gpm (16.7 lpm)
Aux: 9.0 gpm (34.1 lpm)
SCV flow 9.0 gpm (34.1 lpm)
13.4 gpm (50.7 lpm)
Steering flow 5.5 gpm (20.8 lpm)
Total flow 18.9 gpm (71.5 lpm)
ATTENTION! Dear visitors, this site is not a trading platform, an official dealer or a spare parts supplier, so we do not have any price lists, spare parts catalogs, service or owner manuals. We are an information portal and provide the technical specifications.

We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.

Be the first to comment

Leave a Reply

Your email address will not be published.


*