The Massey Ferguson 4608 is a 2WD or 4WD utility tractor from the 4600 series. This tractor was manufactured by Massey Ferguson from 2013 to 2015. The MF 4608 is equipped with a 3.3 L (201.0 cu·in) three-cylinder diesel engine and a power shuttle transmission with 12 forward and 12 reverse gears.
The Massey Ferguson 4608 utility tractor used the AGCO Power 33 AWIC engine. It is a 3.3 L, 3,294 cm2, (201.0 cu·in) three-cylinder turbocharged intercooled diesel engine with 108.0 mm (4.25 in) of the cylinder bore and 120.0 mm (4.72 in) of the piston stroke. This engine produced 81.2 PS (59.7 kW; 80.0 HP) at 2,200 rpm of output power.
The MF 4608 is equipped with power steering, wet disc brakes, two-post folding ROPS or cab (optional), and 102.2 liters (27 US gal.; 22.5 Imp. gal) fuel tank.
Following attachments are available for the Massey Ferguson 4608 utility tractor:
- Massey Ferguson 921X loader
- Massey Ferguson 926X loader
Massey Ferguson 4608 Specifications
General Specifications | |
Model | Massey Ferguson 4608 |
Length | 3,810 mm (150 in) |
Width | 1,990 mm (78.3 in) |
Height (cab) | 2,550 mm (100.4 in) |
Wheel base | – |
Weight (shipping) |
4WD ROPS: 2,750 kg (6,063 lbs) 4WD Cab: 2,950 kg (6,504 lbs) |
Fuel tank capacity | 102.2 liters (27 US gal.; 22.5 Imp. gal) |
Battery | 12V |
Cabin type | Two-post folding ROPS or cab (optional) with air-conditioning |
Engine | |
Engine model | AGCO Power 33 AWIC |
Engine type | Four-stroke, liquid-cooled, inline |
Cylinders | 3 |
Fuel type | Diesel |
Displacement | 3.3 L, 3,294 cm2, (201.0 cu·in) |
Bore and stroke | 108.0 mm X 120.0 mm (4.25 in X 4.72 in) |
Horsepower | 81.2 PS (59.7 kW; 80.0 HP) at 2,200 rpm |
Starter | Electric |
Transmission and chassis | |
Chassis | 4×2 2WD or 4×4 MFWD 4WD |
Steering type | Power |
Brakes | Wet disc |
Final drive | Internal planetary |
Differential lock | Mechanical via foot pedal |
Transmission model | – |
Transmission type | Power shuttle |
Gears | 12 forward and 12 reverse |
Tires | |
Front tires | Ag: 9.5L-15 (2WD), 9.5-24 (4WD) Industrial: 10.5/80-18 |
Rear tires | Ag: 16.9-30 Industrial: 19.5L-24 |
Three-Point Hitch | |
Category | II |
Control type | Position and draft control |
Lift capacity (at 610 mm/ 24 in) | 1,550 kg (3,420 lbs) |
PTO (Power take-off shaft) | |
Rear PTO type | Independent with electronic clutch |
Rear PTO speed | 540/1000 rpm |
Hydraulic system | |
Hydraulic type | Open center tandem pump |
Valves | 1 to 3 |
SCV flow | 17.1 gpm (64.7 lpm) |