Massey Ferguson 461

Massey Ferguson 461The Massey Ferguson 461 is a 2WD or 4WD utility tractor from the 400 series. This tractor was manufactured by Massey Ferguson in Turkey from 2004 to 2005. The MF 461 is equipped with a 3.3 L (201.0 cu·in) three-cylinder diesel engine and a synchronized shuttle with dry disc clutch transmission with 8 forward and 8 reverse gears.

The Massey Ferguson 461 utility tractor used the Perkins 1103C-33T engine. It is a 3.3 L, 3,294 cm2, (201.0 cu·in) three-cylinder turbocharged diesel engine with 105.0 mm (4.13 in) of the cylinder bore and 127.0 mm (5 in) of the piston stroke. This engine produced 76 PS (55.9 kW; 75.0 HP) of output power.
The MF 461 is equipped with power steering, wet disc brakes, a flat-deck platform with two-post folding ROPS, and 48.1 liters (12.7 US gal.; 10.6 Imp. gal) fuel tank.

Following attachments are available for the Massey Ferguson 461 utility tractor:

  • Massey Ferguson 1040 loader
  • Massey Ferguson 1055 loader

Massey Ferguson 461 Specifications

General Specifications
ModelMassey Ferguson 461
Length3,220 mm (126.8 in)
Width1,690 mm (66.5 in)
Height2,340 mm (92.1 in)
Wheel base1,940 mm (76.4 in)
Ground clearance (drawbar)330 mm (13.0 in)
Weight (shipping) 2WD: 2,250 kg (4,960 lbs)
4WD: 2,475 kg (5,455 lbs)
Fuel tank capacity48.1 liters (12.7 US gal.; 10.6 Imp. gal)
Battery12V
Cabin typeFlat-deck platform with two-post folding ROPS.
Engine
Engine modelPerkins 1103C-33T
Engine typeFour-stroke, liquid-cooled, inline
Cylinders3
Fuel typeDiesel
Displacement3.3 L, 3,294 cm2, (201.0 cu·in)
Bore and stroke105.0 mm X 127.0 mm (4.13 in X 5 in)
Horsepower76 PS (55.9 kW; 75.0 HP)
StarterElectric
Transmission and chassis
Chassis4×2 2WD or 4×4 MFWD 4WD
Steering typePower
BrakesWet disc
Final drivePlanetary
Transmission model
Transmission typeSynchronized shuttle with dry disc clutch
Gears8 forward and 8 reverse
Tires
Front tires Ag: –
Rear tires Ag: –
Three-Point Hitch
CategoryII/I
Control typePosition control and top-link draft sensing
Lift capacity (at ends)1,230 kg (2,710 lbs)
PTO (Power take-off shaft)
Rear PTO typeIndependent with hydraulic wet disc clutch
Rear PTO speed540 rpm
Hydraulic system
Hydraulic typeOpen center
Valves2
Pump flow 3-point: 4.4 gpm (16.7 lpm)
Aux: 9.0 gpm (34.1 lpm)
SCV flow 9.0 gpm (34.1 lpm)
13.4 gpm (50.7 lpm)
Steering flow5.5 gpm (20.8 lpm)
Total flow18.9 gpm (71.5 lpm)
ATTENTION! Dear visitors, this site is not a trading platform, an official dealer or a spare parts supplier, so we do not have any price lists, spare parts catalogs, service or owner manuals. We are an information portal and provide the technical specifications.

We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.

Be the first to comment

Leave a Reply

Your email address will not be published.


*