Massey Ferguson 4610

Massey Ferguson 4610The Massey Ferguson 4610 is a 2WD or 4WD utility tractor from the 4600 series. This tractor was manufactured by Massey Ferguson from 2013 to 2015. The Massey Ferguson 4610 is equipped with a 3.3 L (201.0 cu·in) three-cylinder diesel engine and a power shuttle transmission with 12 forward and 12 reverse gears.

The MF 4610 utility tractor used the AGCO Power 33 AWIC engine. It is a 3.3 L, 3,294 cm2, (201.0 cu·in) three-cylinder turbocharged intercooled diesel engine with 108.0 mm (4.25 in) of the cylinder bore and 120.0 mm (4.72 in) of the piston stroke. This engine produced 101.5 PS (74.6 kW; 100.0 HP) at 2,200 rpm of output power.

The Massey Ferguson 4610 is equipped with power steering, wet disc brakes, two-post folding ROPS or Cab with air-conditioning (optional), and 102.2 liters (27 US gal.; 22.5 Imp. gal) fuel tank.

Following attachments are available for the Massey Ferguson 4610 utility tractor:

  • Massey Ferguson 931X loader
  • Massey Ferguson 936X loader

Massey Ferguson 4610 Specifications

General Specifications
Model Massey Ferguson 4610
Length 3,870 mm (152.4 in)
Width 1,990 mm (78.3 in)
Height (cab) 2,600 mm (102.4 in)
Wheel base 2,240 mm (88.2 in)
Weight (shipping) 4WD ROPS: 2,950 kg (6,504 lbs)
4WD Cab: 3,150 kg (6,945 lbs)
Fuel tank capacity 102.2 liters (27 US gal.; 22.5 Imp. gal)
Battery 12V
Cabin type Two-post folding ROPS or Cab with air-conditioning (optional)
Engine model AGCO Power 33 AWIC
Engine type Four-stroke, liquid-cooled, inline
Cylinders 3
Fuel type Diesel
Displacement 3.3 L, 3,294 cm2, (201.0 cu·in)
Bore and stroke 108.0 mm X 120.0 mm (4.25 in X 4.72 in)
Horsepower 101.5 PS (74.6 kW; 100.0 HP) at 2,200 rpm
Starter Electric
Transmission and chassis
Chassis 4×2 2WD or 4×4 MFWD 4WD
Steering type Power
Brakes Wet disc
Final drive Internal planetary
Differential lock Mechanical via foot pedal
Transmission model
Transmission type Power shuttle
Gears 12 forward and 12 reverse
Front tires Ag: 9.5L-15 (2WD), 11.2-24 (4WD)
Rear tires Ag: 16.9-3
Three-Point Hitch
Category II
Control type Position and draft control
Lift capacity (at 610 mm/24 in) 1550 kg (3418 lbs)
PTO (Power take-off shaft)
Rear PTO type Independent with electric clutch
Rear PTO speed 540/1000 rpm
Hydraulic system
Hydraulic type Open center tandem pump
Valves 1 to 3
SCV flow 17.1 gpm (64.7 lpm)
ATTENTION! Dear visitors, this site is not a trading platform, an official dealer or a spare parts supplier, so we do not have any price lists, spare parts catalogs, service or owner manuals. We are an information portal and provide the technical specifications.

We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.

Be the first to comment

Leave a Reply

Your email address will not be published.