Massey Ferguson 8470

Massey Ferguson 8470The Massey Ferguson 8470 is a 4WD row-crop tractor from the 8400 series. This tractor was manufactured by Massey Ferguson in Germany from 2004 to 2007. The Massey Ferguson 8470 is equipped with an 8.4 L (513.0 cu·in) six-cylinder diesel engine and one of two transmissions: the DynaStep transmission with 21 forward and 18 reverse gears or the Dyna-VT transmission with infinite forward and reverse gears.

The Massey Ferguson 8470 row-crop tractor used the Sisu Diesel engine. It is a 8.4 L, 8,407 cm2, (513.0 cu·in) six-cylinder turbocharged intercooled diesel engine with 111.0 mm (4.37 in) of the cylinder bore and 145.0 mm (5.71 in) of the piston stroke. The compression ratio rating is 17.5:1. This engine produced 263.7 PS (193.9 kW; 260.0 HP) at 2,200 rpm of output power.

The Massey Ferguson 8470 is equipped with hydrostatic power steering, independent hydraulic wet disc brakes, Cab, and 600.0 liters (158.5 US gal.; 132 Imp. gal) fuel tank.

Massey Ferguson 8470 Specifications

General Specifications
Model Massey Ferguson 8470
Length 5,230 mm (205.9 in)
Width
Height 3,090 mm (121.7 in)
Wheel base 3,070 mm (120.9 in)
Weight 9,050 kg (19,952 lbs)
Fuel tank capacity 600.0 liters (158.5 US gal.; 132 Imp. gal)
Battery 12V
Cabin type Cab
Engine
Engine model Sisu Diesel
Engine type Four-stroke, liquid-cooled, inline
Cylinders 6
Fuel type Diesel
Displacement 8.4 L, 8,407 cm2, (513.0 cu·in)
Bore and stroke 111.0 mm X 145.0 mm (4.37 in X 5.71 in)
Compression ratio 17.5:1
Horsepower 263.7 PS (193.9 kW; 260 HP) at 2,200 rpm
Starter Electric
Transmission and chassis
Chassis 4×4 MFWD 4WD
Steering type Hydrostatic power
Brakes Independent hydraulic wet disc
Transmission model DynaStep
Transmission type
Gears 21 forward and 18 reverse
Speed Forward: – kmh (0 mph) Reverse: – (0 mph)
Transmission model Dyna-VT
Transmission type
Gears Infinite forward and reverse
Tires
Front tires 16.9R30
Rear tires 18.4R46
Three-Point Hitch
Caterogy III
Control type
Lift capacity (at ends) 6,530 kg (14,400 lbs)
PTO (Power take-off shaft)
Rear PTO type Independent
Rear PTO speed 540/1000, 540E/1000 (optional) rpm
Hydraulic system
Hydraulic type Closed center pressure flow compensated (PFC)
Pressure 2900 psi (199.9 bar)
Valves 4 or 5
Pump flow 39.0 gpm (147.6 lpm)
ATTENTION! Dear visitors, this site is not a trading platform, an official dealer or a spare parts supplier, so we do not have any price lists, spare parts catalogs, service or owner manuals. We are an information portal and provide the technical specifications.

We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.

Be the first to comment

Leave a Reply

Your email address will not be published.


*