Massey Ferguson 8660

Massey Ferguson 8660The Massey Ferguson 8660 is a 4WD row-crop tractor from the 8600 series. This tractor was manufactured by Massey Ferguson in Beauvais, France from 2009 to 2013. The Massey Ferguson 8660 is equipped with an 8.4 L (512.0 cu·in) six-cylinder diesel engine and a continuously variable transmission with infinite (2-range) forward and reverse gears.

The Massey Ferguson 8660 row-crop tractor used the AGCO SISU POWER 84CTA engine. It is a 8.4 L, 8,390 cm2, (512.0 cu·in) six-cylinder turbocharged intercooled diesel engine with 111.0 mm (4.37 in) of the cylinder bore and 145.0 mm (5.71 in) of the piston stroke. The compression ratio rating is 16.7:1. This engine produced 268.7 PS (197.6 kW; 265.0 HP) at 2,200 rpm of output power.

The Massey Ferguson 8660 is equipped with power steering, hydraulic wet disc brakes, Cab, and 590.0 liters (155.9 US gal.; 129.8 Imp. gal) fuel tank for variants with DEF (diesel exhaust fluid) or 690.0 liters (182.3 US gal, 151.8 Imp. gal) without DEF. This tractor could be equipped with the Massey Ferguson 985 loader.

Massey Ferguson 8660 Specifications

General Specifications
ModelMassey Ferguson 8660
Length5,660 mm (222.8 in)
Height3,380 mm (133.1 in)
Wheel base3,100 mm (122 in)
Weight17,640 kg (38,889 lbs)
Fuel tank capacity With DEF: 590.0 liters (155.9 US gal.; 129.8 Imp. gal)
Without DEF: 690.0 liters (182.3 US gal.; 151.8 Imp. gal)
Diesel exhaust fluid (DEF): 30.0 liters (7.9 US gal.; 6.6 Imp. gal)
BatteryTwo 12V, CCA 775A
Cabin typeCab
Engine typeFour-stroke, liquid-cooled, inline
Fuel typeDiesel
Displacement8.4 L, 8,390 cm2, (512.0 cu·in)
Bore and stroke111.0 mm X 145.0 mm (4.37 in X 5.71 in)
Compression ratio16.7:1
Horsepower268.7 PS (197.6 kW; 265.0 HP) at 2,200 rpm
Torque 2009-2010: 1295.0 N·m (132.1 kg·m, 954.4 ft·lb) at 1,500 rpm
2010-2013: 1210.0 N·m (123.4 kg·m, 893.0 ft·lb) at 1,500 rpm
Transmission and chassis
Chassis4×4 MFWD 4WD
Steering typePower
BrakesHydraulic wet disc
Final driveInboard planetary
Differential lockElectro-hydraulic front and rear
Transmission modelDyna-VT
Transmission typeContinuously variable transmission
GearsInfinite (2-range) forward and reverse
Speed Forward: 40.2 kmh (25 mph) Reverse: 38.6 (24 mph)
Front tiresAg: 420/90R30
Rear tiresAg: 480/80R46
Rear hitch
CaterogyIII or IV
Control type
Lift capacity (at ends)12,000 kg (26,460 lbs)
Front hitch
Lift capacity (at ends)5,000 kg (11,020 lbs)
Drawbar Category III
Category III Heavy Duty
Category IV
PTO (Power take-off shaft)
Front PTO typeOptional
Front PTO speed1,000 rpm
Rear PTO typeIndependent with electro-hydraulic clutch
Rear PTO speed 1000E/1000 rpm
540E/1000 rpm
Hydraulic system
Hydraulic typeClosed center load sensing
Pressure2900 psi (199.9 bar)
Valves4 to 6
Pump flow26.4 gpm (99.9 lpm)
Total flow46.2 gpm (174.9 lpm)
ATTENTION! Dear visitors, this site is not a trading platform, an official dealer or a spare parts supplier, so we do not have any price lists, spare parts catalogs, service or owner manuals. We are an information portal and provide the technical specifications.

We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.

Be the first to comment

Leave a Reply

Your email address will not be published.